Junk On The Web For Sale

OTC 1027 7" 2/3 Jaw Reversible 5 Ton Mechanical Grip-O-Matic Puller - $54.99
OTC 4324 Stinger Engine Support Bar - $129.99
OTC 1572 3600 Lbs Capacity Car Dollies (Pair) - $259.99
OTC 6494 Clamshell Strut Spring Compressor - $244.99
SPX OTC1179 8-Way Slide Hammer Set - $104.99
OTC 7894 Jeep/Dodge Ball Joint Service Adapter - $79.99
SPX OTC1906 3" Truck Wheel Bearing Locknut Socket - $24.99
SPX OTC1918 3/4" Drive 4-7/8" 6 Point Truck Wheel Bearing Locknut Socket - $32.99 The OTC1918 is a 4-7/8 6 point truck wheel bearing locknut socket. The socket has a 3/4 square drive opening, permitting the use of an extension and torque wrench to tighten locknut as required. The locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.

OTC 7704 4WD Ball Joint Service Kit - $74.99
SPX OTC 6043 "Blast-Vac" Multipurpose Cleaning Gun - $54.99
OTC 4105 10-1/8" Stroke 10 Ton Single-Acting Spring-Return Ram - $309.99
OTC 1769A Stinger Truck Dual Wheel Dolly - $419.99
OTC 7918 Master Ball Joint Adapter Set - $244.99
SPX OTC7053K Internal or External Retaining Ring Plier Kit - $44.99
SPX OTC3183 Digital Battery Tester Kit - $114.99
OTC 7077 Axle Stud Cone Pliers - $34.99
OTC 6489 Master Cam Tool Set - $409.99 The OTC 6489 is a Ford Cam Positioning Master Tool Set. The OTC Ford Cam Tools ensure correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs. OTC Ford Cam Tools avoid improperly timed cams that can cause poor performance, poor mileage and possible vehicle check engine light engagement. The tools are also broken down into three smaller kit configurations. No. 6486 is OTC Ford Cam Tool Kit for 2.0L Zetec engines in Contour/ Mystique, No. 6487 is OTC Ford Cam Tool Kit for 1992 thru current 4.6L, 5.4L and 6.8L modular V-8 engines and No. 6488 is OTC Ford Cam Tool Kit for 1997 thru 2002 4.0L Explorer/ Mountaineer SOHC V-6 engines.

OTC 7825 Ford Ball Joint Remover - $54.99
OTC 6010 7-Pc Locknut Socket Set - $94.99
OTC 7904A D-Karbonizer4 Intake System Cleaning Treatment -12 Pack - $129.99
OTC 1525 2 Ton Hydraulic Floor Jack - $319.99
OTC 6507 4-Pc Fuel/Oil Line Disconnect Tool Set - $39.99
OTC 3398 Fuel Injection Pulse Tester - $109.99
OTC 6006 Dodge Truck Locknut Socket - $39.99
OTC 2012A 1250 lbs Stinger Engine Stand with Tool Tray - $119.99
SPX OTC6498 Ford 4.6L 4-Valve Cam Timing Kit - $114.99 SPX OTC6498 is a ford 4.6L 4-Valve cam timing kit. It works on 199304 Ford, Lincoln, Mercury, 199398 Lincoln Mark Series, 199502 Lincoln Continental, 199604 Ford Mustang, 200304 Mercury Marauder 200304, Lincoln Aviator vehicles with 4.6L 4-valve 8V engine.

SPX OTC8074 Step Plate Adapter Set - $44.99
SPX OTC1170 Pilot Bearing Puller - $64.99
SPX OTC1915 3/4" Drive 4-1/8" 6 Point Truck Wheel Bearing Locknut Socket - $25.99
SPX OTC7682 18" Handled Pry Bar with 7/16" Square Bent Head - $24.99
SPX OTC 4645 Serpentine Belt Tool Set - $39.99
OTC 6987 4-Pc Metric Stud Remover Set - $44.99
SPX OTC 5044 Self-Adjusting Clutch Rotating Tool - $39.99
SPX OTC1924 3-3/8" Lock Nut Wrench Socket - $29.99
SPX OTC1936 3/4" Drive 2-3/8" 6 Point Truck Wheel Bearing Locknut Socket - $29.99 The OTC1936 is a 2-3/8 6 point truck wheel bearing locknut socket. The socket has a 3/4 square drive opening, permitting the use of an extension and torque wrench to tighten locknut as required. The locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance.

SPX OTC1919 4-7/8" Lock Nut Wrench Socket - $38.99
SPX OTC1910 3/4" Drive 3-1/2" 6 Point Truck Wheel Bearing Locknut Socket - $24.99
OTC 4502 2-Pc Stinger Hose Clamp Pliers Set - $18.99
OTC 7394 Universal Hub Puller - $149.99
OTC 7635A Basic Fuel Injection Pressure Testing Kit - $119.99
OTC 1124 1/2" - 5-3/4" Capacity Bearing Splitter - $129.99
SPX OTC0300 1 1/16" - 2" Internal Straight Snap Ring Pliers - $24.99
SPX OTC1904 3/4" Drive 2-9/16" 6 Point Truck Wheel Bearing Locknut Socket - $19.99
SPX OTC0500 Internal Straight Snap Ring Pliers - $29.99 The OTC0500 is an internal straight snap ring plier. It is used for removing and installing internal snap rings.

OTC 7956 Air Bag Simulator - $49.99
OTC 4530 Stinger Power Steering Pump Pulley Service Kit - $49.99
SPX OTC 1534A Passenger and Light Truck Wheel Step - $39.99
SPX OTC0100 3/8" - 1 3/8" Internal Straight Snap Ring Pliers - $24.99
OTC 7005 Power Steering Pump Pulley Installer - $44.99
SPX OTC4313A 12 Ton Air-Assist Bottle Jack - $194.99
Acoustical concepts inc. OTC7165 18" PRY BAR - $29.99
SPX OTC7080 Ball Joint Spanner Wrench - $29.99
OTC 7920 4WD GM Ball Joint Adapter Set - $64.99 The OTC 7920 is a 4WD GM Ball Joint Adapter Set. The set is used with ball joint service set Nos. 6530, 7248 and 7249 to service GMs 1996 to 2001 4WD 1/2 and 3/4-ton pickups and Suburban, Yukon and Tahoe SUVs. It easily remove or install either aftermarket or original equipment press-fit lower ball joints.

OTC 7249 Ball Joint Service Kit - $104.99
SPX OTC6613 Variable Pin Spanner Wrench - $54.99
SPX OTC7374 Rear Axle Pulling Plate w/5 lbs Slide Hammer Assembly - $69.99
OTC 4509 Straight-Blade Hose Cutter - $8.99
SPX OTC7684 32" Handled Pry Bar with 1/2" Square Bent Head - $39.99
OTC 3054C 11-Pc Noid Light and IAC Test Kit with Harness Extension - $64.99
OTC 1519A 10-Ton USA Hydraulics Collision Repair Set - $569.99
OTC 1513A 4 Ton Stinger Hydraulic Collision Repair Set - $164.99
SPX OTC1927 3-13/16" Lock Nut Wrench Socket - $28.99 The SPX OTC1927 is a 3-13/16 Lock Nut Wrench Socket. The SPX OTC1927 8 point socket has a 3/4 square drive opening, permitting the use of an extension and torque wrench to tighten locknut as required. Locknut removal and installation is simple, even when wide-rim wheels are involved, since a long extension may be attached to the socket to provide the necessary clearance. Socket is made of high-strength steel.

OTC 7413 Ford/Chrysler Heater Hose Disconnect Tool - $59.99
OTC 7947 8 Way Slide Hammer Puller Set - $129.99
OTC 7494A 3-Pc Rear Axle Bearing Puller Set - $69.99
SPX OTC0200 1/4" - 1" Internal Straight Snap Ring Pliers - $24.99
SPX OTC1932 3/4" Drive 2-7/8" 6 Point Truck Wheel Bearing Locknut Socket - $29.99
OTC 4581 Stinger Blind Hole Bearing Puller Set - $119.99
SPX OTC1907 3" Lock Nut Wrench Socket - $29.99
OTC 1784B 12 Ton Stinger Jack Stands - $119.99
OTC 7815 Steering Wheel Lock Plate Compressor - $49.99 The OTC 7815 is a Steering Wheel Lock Plate Compressor. The OTC 7815 compresses the steering wheel lock plate to remove and install the snap ring retainer, accessing the steering column. It is used on all GM and older AMC and Chrysler vehicles with or without tilt steering columns.

OTC 7951 Ford Idle Speed Control Tester - $179.99
OTC 7208A Front Hub Puller with Spare Locknut - $39.99
SPX OTC7158 Truck Front Wheel Bearing Locknut Socket - $29.99
SPX OTC 4491 Mechanic's Stethoscope - $15.99
SPX OTC1934 3/4" Drive 3-1/8" 6 Point Truck Wheel Bearing Locknut Socket - $29.99
OTC 9767 6 ft. Hydraulic Hose - $54.99
OTC 6290 Front Hub Puller for 4WD Vehicles - $84.99
OTC 4320A 20-Ton Stinger Hydraulic Bottle Jack - $69.99
Acoustical concepts inc. OTC7166 18" JIMMY BAR - $21.99 Acoustical concepts inc. OTC7166 18" JIMMY BAR

OTC 6517 9-Pc Quick Disconnect Tool Set - $29.99
SPX OTC1937 2-3/4" Lock Nut Wrench Socket - $22.99
SPX OTC3182 130 Amps Digital Battery Load Tester - $59.99
OTC 6496 Pitman Arm Puller for SUV - $39.99
OTC 3500-02 Digital Amps Clamp Meter - $309.99
SPX OTC6689 Chrysler/Jeep Master Cam 15 Tool Set - $279.99
SPX OTC1925 3-3/4" Lock Nut Wrench Socket - $22.99
OTC 938 17-1/2 Ton Push-Puller - $174.99
SPX OTC3367 Digital Timing Light - $110.99 The SPX OTC3367 is a Digital Timing Light. OTC3367 Professional Digital Timing Light has advanced features with a bright LED screen and mode indicator lights. It features removable leads with positive twist lock connector, one touch control, durable, plated ABS housing with over molded grips and heat resistant over molding on battery clips.

SPX OTC1938 4-1/2" Lock Nut Wrench Socket - $34.99
SPX OTC4485 Spot Weld Cutter Set - $34.99
OTC 3509 Pocket Sized Digital Multimeter - $34.99
Acoustical concepts inc. OTC7167 24" JIMMY BAR - $34.99
OTC 4518 Stinger 5 Ton Bar Puller/Bearing Separator Set - $74.99
OTC 4026 Cobra Air/Hydraulic Power Unit - $354.99
OTC 7604 Disconnect Tool Set - $54.99
OTC 4534 Multipurpose Bearing & Pulley Puller Set - $145.99
OTC 6275 5-Pc Tie Rod/Pitman Arm Adjusting Set - $74.99 The OTC 6275 is a 5-Pc Tie Rod/Pitman Arm Adjusting Set. The set consists of one Pitman arm and four tie rod tools in a blow-molded storage case.

SPX OTC7421 54" Jimmy Bar - $84.99
OTC 7948 Silver Slapper 10 Way Slide Hammer Puller Set - $229.99
OTC 7269 Wheel Bearing Locknut Socket - $34.99
PAM Fastening HB220 1/2" Hot Melt Applicator - $69.99
PAM Fastening EZ Driver Screwdriver System - $12.99
Paslode 404069 7/8-Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box) - $39.99
Paslode 650432 2-3/8 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket) - $17.99
Paslode 650481 1-1/2 Inch x .148 Inch (10D) Heat-Treated Mechanical-Galvanized Positive Placementâ„¢ Framing Fasteners with Paper Collation (500 Per Box) - $24.99
Paslode 501230 S200-S16P 16-Gauge Pneumatic Standard Crown Stapler - $279.99 Let the Paslode 501230 S200-S16P Pneumatic Standard Crown Stapler be your go-to tool for floor decking, vinyl siding, insulation installation, or roof, soft wall, and plywood sheathing. The S200-S16P can handle anything. And you can handle it. Its lightweight to help prevent you from getting fatigued. The S200-S16P Pneumatic Crown Stapler also has a quick-clear feature so you can take care of any jams that may occur in the magazine and move on to the next task. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650433 3 Inch x .120 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket) - $18.99
Paslode 501161F Factory Reconditioned T125-F18 18-Gauge Pneumatic Straight Brad Nailer - $39.99
Paslode 816000 Tall Red Fuel Cell for Framing Nailer - 2 Pack - $16.99
Paslode 500970U Factory Reconditioned T250-F16 16-Gauge Pneumatic Trim/Finish Nailer - $139.99
Paslode 900200 Two-Hour Battery Charger for Impulse Cordless Tools - $49.99
Paslode 650285 2-Inch 16-Gauge Straight Finish Nails (2,000 Per Box) - $14.99
Paslode 219226 No Mar Tip 3 Pack for Finish Nailers - $7.99
Paslode OT2695 1-1/2 Inch 16-Gauge Galvanized Standard Crown Staples (10,500 Per Box) - $54.99
Paslode 501270 S150-W16R 16-Gauge Wide-Crown Pneumatic Construction Stapler - $289.99 Let the Paslode 501270 S150-W16R Pneumatic Wide Crown Construction Stapler be your go-to tool for fastening roofing shingles, insulation, sheathing, wite lathing, and housewrap. The S150-W16R can handle anything - and you can handle it. Its lightweight and has a comfort grip to help prevent you from getting fatigued. The S150-W16R Pneumatic Wide Crown Construction Stapler also has a quick-clear feature so you can take care of any jams that may occur in the magazine and move on to the next task. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode OT2855 1 1/2 Inch 16 Gauge Wide Crown Staples - $64.99
Paslode 650232 2-1/2" Inch 16-Gauge Angled Finish Nails (2,000 Per Box) - $24.99
Paslode 219247 High-Altitude Blue Metering Valve for Impulse Cordless Trim Tools - 4 Pack - $7.99
Paslode 650047 2-Inch 16-Gauge Angled Finish Nails (2,000 Per Box) - $24.99
Paslode 900420F Factory Reconditioned IM325CT Cordless Angled Framing Nailer with Impulse Technology - $259.99
Paslode 219305 Cordless Framing Tool Tune-Up Kit - $24.99
Paslode 650431 2 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket) - $13.99
Paslode 404705 No-Mar Contact Element Tip for Impulse Cordless Framing Nailers - $26.99
Paslode 650215 2 Inch 18 Gauge Brad Nails - 2,000 Per Box - $11.99 The Paslode 650215 is a box of 2,000 2 Inch 18 gauge brad nails. They can be used with the Paslode 500959 T200-F18 18 Gauge Pneumatic Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 401482 Cordless Nail Gun Oil 4oz - $6.99
Paslode 405000U Factory Reconditioned 3175/44RCU Pneumatic Coil Roofing Nailer - $169.99
Paslode 902000F Factory Reconditioned IM250II 16-Gauge Cordless Straight Finish Nailer with Impulse Technology - $219.99
Paslode 650231 1-1/2 Inch 16-Gauge Angled Finish Nails (2,000 Per Box) - $18.99
Paslode 404717 Rechargeable 6-Volt Battery for Impulse Cordless Nailers - $49.99
Paslode 402500 Rechargeable 6-Volt Battery for Impulse Cordless Staplers - $59.99
Paslode 219236 No Mar Tip 3 Pack for Angled Finish Nailers - $7.99
Paslode 650213 1-1/4 Inch 18 Gauge Brad Nail 2000/bx - $8.99
Paslode 500959 T200-F18 18-Gauge Pneumatic Straight Brad Nailer - $109.99 If youre searching for a great value in a nailer - like we all are - look no further than the Paslode 500959 T200-F18 Brad Nailer. Paslode combines power and speed in a quality, lightweight design. The Paslode 500959 is perfect for fine finish work as it has a no-mar tip which will keep your material from getting nicked. This 18-gauge nailer minimizes wood splitting and leaves the smallest holes imaginable in your working surface, making it ideal for pre-finished or painted trim. Though all of the features make for an excellent brad nailer, the most remarkable feature is the streamlined nose architecture. The Paslode 500959 can fit into places other nailers cant even reach. This assures your fastener will drive exactly where you want it to so you dont have to worry about misfires in delicate trimwork. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode OT2250 1-3/4 Inch 16-Gauge Galvanized Standard Crown Staples (9,000 Per Box) - $54.99
Paslode 816001 Tall Yellow Fuel Cell for Cordless Stapler - 2 Pack - $17.99
Paslode 501680 T250S-F16 16-Gauge Pneumatic Straight Finish Nailer - $169.99
Paslode 404071 1-1/4 Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box) - $64.99
Paslode 900507 Impulse Cordless Tool Automotive Charger Adapter - $13.99
Paslode 500855 F250S-PP Positive Placementâ„¢ Pneumatic Metal Hardware Framing Nailer - $359.99
Paslode 650434 2-3/8 Inch x .113 Inch Brite Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket) - $13.99
Paslode 650283 1-1/2 Inch 16-Gauge Straight Finish Nails (2,000 Per Box) - $12.99
Paslode 650287 2-1/2 Inch 16-Gauge Straight Finish Nails (2,000 Per Box) - $19.99 The Paslode 650285 is a box of 2,000 2 16-gauge straight finish nails. They can be used with the Paslode 902000 IM250S-F16 16-Gauge Cordless Straight Finish Nailer, the Paslode 501680 T250S-F16 16-Gauge Pneumatic Straight Finish Nailer, and the Paslode 403700 3250-F16 16-Gauge Trim/Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 500959F Factory Reconditioned T200-F18 18-Gauge Pneumatic Straight Brad Nailer - $49.99
Paslode 404070 1-Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box) - $44.99
Paslode 219304 Cordless Trim Tool Tune-Up Kit - $24.99
Paslode 900600F Factory Reconditioned IM250A 16-Gauge Cordless Angled Finish Nailer with Impulse Technology - $209.99
Paslode 650039 Short Yellow Fuel Cell for Brad and Finish Nailers - 4 Pack - $26.99
Paslode 501000F Factory Reconditioned F-350S PowerMaster Plusâ„¢ Pneumatic Framing Strip Nailer - $189.99
Paslode 219086 Degreaser/Cleaner Safety Solvent 12oz - $6.99
Paslode 650230 1-1/4 Inch 16-Gauge Angled Finish Nails (2,000 Per Box) - $16.99
Paslode 650436 3-1/4 Inch x .131 Inch Brite Round-Head Smooth-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket) - $15.99 All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650436 Framing Nails are no exception. The Paslode 650436 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plusâ„¢ Pneumatic Framing Strip Nailer. The Paslode 650436 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. Attention International Customers Paslode products cannot be shipped outside of the USA.

Performance W3003DB 4-Piece Cushion Grip Plier Set - $9.99
Performance 8-Ton Engine Crane Replacement Ram - $66.99
Performance W88990 12 Pocket Rool Up Tool Pouch - $3.99
Performance W6C 6" Adjustable Wrench - $3.99
Performance W746 Utility Knife - $4.99
Performance W54213 Injector Needle - Grease Gun - $2.99
Performance W994 Multi-Function Folding Knife - $0.99
Performance W1200C Telescoping Magnetic Retriever - $3.99
Performance W36106 1/4" Round Head Ratchet - $4.99 Engineered for toughness and durabilityChrome vandium steel, fully polished1/4 inch drive. 42 gear teeth, 5-1/2 inch long. Round shaped head.

Performance W1136 4pc Pipe Wrench Set - $29.99
Performance W5203 419pc Metric O-Ring Assortment - $10.99
Performance W1633 20-Ton Hydraulic Bottle Jack - $47.99
Performance W747 100-Piece Single Edge Razor Blades - $5.99
Performance W32532 1/2" Drive 1" 12-Point Socket - $2.99
Performance W32326 1/2" Drive 13/16" 6-Point Deep Socket - $3.99
Performance W2981 Heavy Duty 12 Volt Circuit Tester - $5.99
Performance W197B Parts Cleaning Brush - $1.99
Performance W1313 15-Piece Star Socket Bit Set - $8.99 Hardened alloy steel bits Professional sand finish Includes 1/4 drive sizes T-10, T-15, T-20, T-25, T-27, T-30; 3/8 drive sizes T-40, T-45, T-47, T-50, T-55, T-60; 3/8 F to 1/4 M adaptor, and two bonus storage rails

Performance W1010 Straight Pein Finish Hammer - $8.99
Performance W50037 146-Pc Rotary Tool Set - $17.99
Performance W54016 16inch Tool Box - $8.99
Performance W1047 11" Offset Long Hnd Plier - $6.99
Performance W80054 7-Piece Stubby Wrench Set (SAE) - $12.99
Performance 1-7/8" Open Stock Jumbo Combination Wrench - $16.99
Performance W5099 100' Wind-up Tape Measure - $8.99
Performance W932 4 in 1 Stub Ratchet Screwdriver - $3.18
Performance 14-Piece 3/8� Drive Socket Set (Metric) - $7.99 Heat treated alloy steelDrop forged for strengthPolished chrome plated finishSizes 7mm - 19mmSocket rail for storage

Performance W1911 Telescoping Inspection Mirror - $1.99
Performance W230 Safety Scraper - $3.99
Performance W32202 9-Piece 1/2" Drive Socket Set (MM) - $8.99
Performance W89001 Tech Wear Gloves (X-Large) - $13.99
Performance Lever Grease Gun - $7.99
Performance W5225 900pc Spring & Cotter Pin Assortment - $24.99
Performance W316C 14mm (Metric) Combination Wrench - $1.99
Performance W971 8 in 1 Lighted Magnetic Screwdriver - $5.99
Performance W1198 100-Piece 1/4", 3/8" & 1/2" Dr. Socket & Bit Set - $24.99 -Drop forged carbon steel, polished and chrome plated-1/4, 3/8 and 1/2 driver pro style ratchets-51 regular and deep SAE and Metric 6-point sockets-Magnetic bit driver and 22 screwdriver bits-Blow molded storage case

Performance W5035 35'Tape Meas QK Read W/Mag Tip - $5.99
Performance W1309 17 Piece Bit Set - $2.99
Performance W54022 22" Organizer Tool Box - $19.99
Performance W41031 1,250 lb Engine Stand - $64.99
Performance W5214 125-Pc Rubber Grommet Assortment - $7.99
Performance W75933 9-Pc L Type Star Wrench Set - $4.99
Performance W2398 25ft Metal Drop Light - $9.99
Performance 1/2" Dr. 2-Lug Spindle Nut Wrench - $9.99
Performance W745C Retractable Utility Knife - $2.19 3 position retractable blade Extra blade included stores in handle

Performance W1147C Car Door Lock-Out Tool - $3.99
Performance W2029DB 9-Piece Dent and Seal Puller - $14.99
Performance W38106 3/8" dr Chrome Vanadium Ratchet - $5.99
Performance W732 Heavy Duty Hack Saw - $7.99
Performance W80594 Vaccum Fuel Pump Tester - $13.99
Performance 13mm (Metric) Combination Wrench - $1.99
Performance W5212 300pc Snap Ring Assortment - $6.99
Performance W1352 45-Piece Power Bit Set - $9.99
Performance MV6 6" Bench Vise - $79.99 6 Bench vise, 360 swivel with dual lock-downsLarge anvilHeavy duty drop forged, heat treated jawsColor May Vary

Performance W54005 Tough Truck Rolling Cart - $35.99
Performance W924 3-Piece Long Shaft Screwdriver Set - $9.99
Performance W80050 8-Piece Precision Wrench Set (SAE) - $8.99
Performance 22-Piece Ball End Hex Key Set - $7.99
Performance W38157 3-Piece Wobble Extension Set, 3/8-Inch Drive - $6.99
Performance W155 1/2" Drive 32mm Front Wheel Drive Axle Nut Socket - $8.99
Performance W38302 17 Piece 1/2 inch Driver Socket Set With Ratchet - $18.99
Performance W1623 4-Ton Hydraulic Bottle Jack - $13.99
Performance W702C Tubing Cutter - $5.99 Tube cutting range 1/8 to 1-1/8 (3 to 28mm).Die cast aluminum frame with steel reamer.Hardened cutting wheel.Large, easy grip tension knob.

Performance W1014 Utility Dolly - $8.99
Performance W1601 3000lb Aluminum Jack & Stand Combo - $159.99
Performance 8-Piece Precision Wrench Set MM - $8.99
Performance W41030 3/4 Ton Engine Leveler - $35.99
Performance W32111 3/8 inch & 1/2 inch Dual Drive Ratchet - $11.99
Performance W85008 Roll-Around Stool with Pneumatic Seat - $37.99
Performance 1-5/8" Open Stock Jumbo Combination Wrench - $8.99
Performance W350M 3PC Flare-nut Wrench Set (Metric) - $4.99
Performance W1048 11" 1/2" Hose/Cable Plier - $6.99 11 1/2 Hose/Cable Plier

Performance W5022 16' X 3/4" Tape Measure - $2.99
Performance W1335 12-Piece 1/4", 3/8", & 1/2" Drive Star Socket Set - $13.99
Performance W3939 2-1/2" Drill Press Vise - $5.98
Performance W805C 3/8" Drive Universal Joint - $3.99
Performance W5200 200pc Spring Assortment - $5.99
Performance 14-Piece 3/8� Drive Socket Set (SAE) - $7.99
Performance W154 1/2" Drive 36mm Front Wheel Drive Axle Nut Socket - $6.99
Performance W1138C 3/8� to 1/4� Drive Reducing Adapter - $0.99
Performance W5210 150pc Hair Pin Assortment - $6.99 FeaturesStorage Tray6 Sizes 8 Pcs 5/32inch x 2-15/16 inch, 20 Pcs 9/64 inch x 1-3/4 inch, 25 Pcs 7/64 inch x 1-5/8 inch, 25 Pcs 5/64 inch x 1-9/16 inch, 30 Pcs 5/64 inch x 1-5/16 inch, 42 Pcs 3/32 inch x 1-3/16 inch

Performance W1013 Pick and Finish Hammer - $9.99
Performance W89324 Front Hub Puller & Installer Set - $52.99
Performance W38105 3/8 inch DR Flip Ratchet - $14.99
Performance W1132-30 Mini Pliers - $1.99
Performance W30759 7 Piece Plier Set - $22.99
Performance W1065 12-Piece Combination Wrench Set w/Tray - $10.99
Performance W5221 347pc SAE Nut & Bolt Assortment - $4.99
Performance W38301 19PC 3/8" dr Shallow Sockets - $11.99
Performance W32524 1/2" Drive 3/4" 12-Point Socket - $2.99 Heat treated alloy steel Drop forged for strength Polished chrome plated finish 1/2 drive. 3/4 12-point deep socket.

Performance M7224 24 oz. Dead Blow Hammer - $8.99
Performance W740C 10" Hack Saw Blades - $1.99
Performance W80150 6" Plastic Caliper - $0.99
Performance W30719 5 PC Half Moon Wrench Set MM - $19.99
Performance W32324 1/2" Drive 3/4" 6-Point Deep Socket - $3.99
Performance W1319 6 Piece L Shape Star Driver Set - $6.99
Performance W80557 Tie Rod End/Pitman Arm Puller - $7.99
Performance 17mm (Metric) Combination Wrench - $2.99
Performance W89322 Strut Spring Compressor - $28.99 For most automotive and light truck applicationsIncludes locking pins for additional safetyDrop forged steel constructedBilingual InstructionsBlow molded storage case

Performance W32141 3 Piece 1/2 inch Driver Wobble Extensions: 3", 5", and 10" - $10.99
Performance W36901 22pc 1/4in Drive Socket Set - SAE - $23.99
Performance 13-Piece Drill Bit Set - $3.99
Performance W38318 3/8" Drive 9/16" 6-Point Deep Socket - $2.99
Performance W38418 18 mm 6 Point 3/8" Drive Deep Well Sockets - $3.42
Performance W743 4" Retractable Safety Scraper - $1.99
Performance W86500 7-Way Crimping Tool - $4.99
Performance W80275 10-Piece T-Handle Hex Key Set METRIC. - $6.99
Performance 4" C-Clamp - $4.99 4 C-clamp Very handy around the home and shopDurable steel construction

Performance W1044 11" Straight Long Handle Pliers - $6.99
Performance W376B 1-5/16" Open Stock Jumbo Wrench - $6.99
Performance W1384 33 Piece Security Bit Set - $3.99
Performance W54216 4" Needle Nozzle With Quick Disconnect - $4.99
Performance W750 7-Piece Chisel and Punch Set - $5.99
Performance W54212 Grease Gun Coupler - $1.99
Performance W1206P Ball Joint Separator (Pickle Fork) - $4.99
Performance W5206 150pc Large Cotter Pin Assortment - $7.99
Performance W1595 95pc Socket Set w/Hex Keys - $19.99 95pc Socket Set w/Hex Keys

Performance 8" C-Clamp - $8.99
Performance W34906 16-Piece 3/4" Drive Metric Socket Set - $69.99
Performance W4001DB 40pc Tap and Die Set (SAE) - $15.99
Performance 1/2" SAE Combination Wrench - $1.99
Performance W5227 120pc Fuse Assortment Kit - $5.99
Performance W9015 21 Piece Drill Bit Set - $12.99
Performance Digital Multi-Tester - $7.99
Performance 25-Piece Drill Bit Set w/Titanium Coating - $9.99
Performance W36000 1/4" Drive Socket Rail - $3.99 The Wilmar W36000 is a 1/4 Drive Socket Rail. The pro style socket holder with handle is 18 long and holds 14 sockets. It features chrome plated clips and rail with heavy-duty angled plastic handle.

Performance W54031 18pc Compartment Organizer - $13.99
Performance W83245 2-9/16" rd Hex Lock Nut Socket - $10.99
Performance W32904 26-Piece 1/2" Driver Socket Tool Set (MM) - $47.99
Performance 1-1/4" SAE Combination Wrench - $8.99
Performance W32150 1/2" Drive 10" Extension - $4.99
Performance W2014 7-1/2" Small Pry Bar - $3.99
Performance W89318 9pc Axle Nut Socket Set - $64.99
Performance 1/4" SAE Combination Wrench - $1.99
Performance Power Steering Pump/Alternator Pulley Puller - $13.99 Removes power steering and alternator pulleys on selected applications of Chrysler, Ford, GM, and Volkswagen with hub sizes of 1-1/8, 1-1/4, 1-5/16, and 1-3/8 Use Performance Tool Pulley Installer (part # W87021) to reinstall pulleys on Ford vehicles Instructions on back of package

Performance W88989 Anti-Fatigue Floor Mats 2'X2' - $19.99
Performance W30937 7-Pc Impact U-joint & Adaptor Set - $13.99
Performance W1 20" 4-Way Lug Wrench - $7.99
Performance W38890 8pc 3/8in Hex Bit Socket Set - Metric - $11.99
Performance W54202 Professional Grease Gun 14 oz. - $9.99
Performance W5218 720pc Washer Assortment - $4.99
Performance W10055 Air Tank Gauge - $3.99
Performance 5-Piece Utility Knife Replacement Blade Set - $0.99
Performance W80028 28 Piece Screwdriver Set - $22.99 Chrome Vanadium steel shafts fully hardened, tempered and chrome plated.Driver tips are hardened, shot blasted and magnetized.Larger sizes fitted with hex drive bolster.Classic type handles manufactured from high impact resistant material.

Performance Coil W80554 Spring Compressor - $29.99
Performance W11 25" 4 Way Lug Wrench - $11.99
Performance W32140 3 Piece 1/2 inch Driver Extensions: 3", 5", and 10" - $7.99
Performance W753 4pc Punch & Chisel - $4.99
Performance W1080 30pc Standard & Stubby Wrench Set - $27.99
Performance W156 1/2" Drive 34mm Front Wheel Drive Axle Nut Socket - $6.99
Performance S/4 4 Piece Jumbo Combo Wrench Set - $89.99
Performance W5205 560pc Cotter Pin Assortment - $5.99
Performance W54008 Steel Stand Adjustable Workstation - $37.99 Performance W54008 Steel Stand Adjustable Workstation

Performance W153 1/2" Drive 30mm Front Wheel Drive Axle Nut Socket - $6.99
Performance W352 8-Piece 3/8" Crow Foot Wrench Set (Metric) - $12.99
Performance W151P Harmonic Balance Puller - $7.99
Performance W1061 11-Piece Fully Polished Combo Wrench Set (SAE) - $10.99
Performance W1072 5-Piece Plier Set - $18.99
Performance W88992 17" Tool Bag with 18 Pockets - $14.99
Performance W10C 10" Adjustable Wrench - $3.99
Performance W54220 Suction Gun - $6.99
Performance W32106 1/2" Drive Round Head Ratchet - $7.99 Engineered for toughness and durability Chrome vandium steel, fully polished 1/2" drive. 42 gear teeth, 9-3/4" long. Round shaped head.

Performance W85005 40" 6 Caster Creeper with Adjustable Headrest - $38.99
Performance 5" C-Clamp - $3.99
Performance W556 6 PC Tape Set with Mini Knife - $3.99
Performance W54250 Ratchet Caulking Gun - $2.99
Performance W5207 Multi-Use Repair Kit - $19.99
Performance W1388 10-Piece 3/8� Drive Metric Hex Bit Socket Set - $12.99
Performance 0-6" Stainless Steel Dial Caliper - $20.99
Performance W83244 2-1/2" rd Hex Lock Nut Socket - $9.99
Performance W975 6 in 1 Quick Change Screwdriver - $1.99 6-in-1 Quick Change Screwdriver

Performance Large Dent Puller - $8.99
Performance W1387 10 pc 3/8� Drive SAE Hex Bit Socket Set - $12.99
Performance W5020 12' X 5/8 Tape Measure - $2.99
Performance W54026 26 inch Diamond Back Tool Box - $38.99
Performance W54041 3.5 Gallon Parts Washer - $60.99
Performance W38202 10-Piece 3/8" Drive Socket Set (MM) - $6.99
Performance W54011 2-Pc Light Weight Folding Sawhorse - $19.99
Performance W142 Pitman Arm Puller - $8.99
Performance W5215 70pc Grease Fitting Assortment - $8.99 70pc Grease Fitting AssortmentStorage TrayAll Purpose6 SizesWeight 2 Lbs

Performance Tech Wear Gloves (Small) - $12.99
Performance W5217 110pc Copper Washer Assortment - $6.99
Performance W150 Steering Wheel Puller - $7.99
Performance W89330 7-Piece Fuel & Transmission Line Disconnect Tool Set - $25.99
Performance W5216 350 Lock & Flat Washer Assortment - $6.99
Performance W1149 3-Piece Wire Brush Set - $3.99
Performance W1252 Utility Wire Brush with Scraper - $1.99
Performance W1386 8-Piece Tamper Resistant Star Bit Set - $3.99
Performance W1385 9-Piece 1/4" & 3/8" Drive Tamper Resistant Star Socket Set - $11.99 Heat treated alloy steel(9) sizes 1/4 dr T-10 thru T-30 3/8 dr T-40 thru T-50Bonus storage rail included

Performance W2918 250-Piece Cable/Wire Tie Assortment - $4.99
Performance W1368 204-Piece Master Drill & Driver Bit Set - $33.99
Performance W38117 3/8 inch Dr. Offset Ratchet - $11.99
Performance W741C 12" Hack Saw Blades - $1.99
Performance W88996 16" X 96" Tool Box Drawer Liner - $7.99
Performance W34904 21-Piece 3/4" Drive SAE Socket Set - $149.99
Performance W88991 13" Tool Bag - $12.99
Performance W1526 165 Piece Tool Set - $71.99
Performance W1179 9-Piece 3/4â€� Dr. Jumbo Socket Set - $49.99 Drop forged steel (8) 12 point sockets 2-1/16” to 2-1/2” Sturdy metal box

Wilmar FC280 28-inch Hi Vis Cone - $24.99
Performance W748 Hobby (Exacto) Knife - $1.99
Performance W458 4" Stainless Steel All-Purpose Knife - $4.99
Performance 3PC Flarenut Wrench Set (SAE) - $4.99
Performance W54311 3-1/4" Oil Filter Wrenches - $6.99
Performance W5208 300pc E-Clip Assortment - $5.99
Performance W38870 8pc 3/8in Hex Bit Socket Set - SAE - $11.99
Performance W54232 Lever Action Dispenser - $27.99
Performance W80653 Pulley Puller - $16.99 Heavy duty constructionAdjustable jaw tensionPulls pressed-on 1 and 2-groove pulleys on alternators and power steering pumpsAlso removes some alternator bearings

Wilmar W83035 35 MM 1" Drive Budd Wheel Socket - $6.99
Performance W89708 Pulley Puller & Installer Set - $39.99
Performance W9016 21-Piece Titanium Drill Bit Set - $14.99
Performance W38217 3/8" Drive 17mm 6-Point Socket - $1.99
Performance W30750 2pc Locking Plier Set - $5.99
Performance 4" 3-Jaw Reversible Gear Puller - $7.99
Performance W5199 1000 Piece Organizer Caddy - $7.99
Performance 4-Piece Metric 12 Point Bit Set - $4.99
Performance 18mm Chrome Vanadium Steel Combo Wrench - $2.99 Heat treated chrome vanadium steel Full pattern, raised panel design Polished, chrome plated finish

Performance W54019 19" Organizer Tool Box - $12.99
Wilmar W83041 41 MM 1" Drive Budd Wheel Socket - $12.99
Performance 8mm (Metric) Combination Wrench - $1.99
Performance 8" Adjustable Wrench - $3.99
Performance W32540 1/2" Drive 1-1/4" 12-Point Socket - $3.99
Performance 1-1/2" Open Stock Jumbo Combination Wrench - $7.99
Mechanics M202P 3/8� Dr. Click Torque Adjustable Wrench - $15.99
Performance W32002 9-Piece 1/2" Drive Socket Set (SAE) - $9.99
Performance W5213 160pc Wire Terminal Assortment - $8.99 Kit contains 160 pieces of 20 items, packed in a plastic storage case.ProSeal connectors are Crimp-and-Heat-Seal style for strong and water resistant connections.Easy-to-use.Color-coded.

Performance 901pd Phillips Screwdriver - $0.99
Performance 15mm (Metric) Combination Wrench - $1.99
Performance W1150S Snap Ring Plier Set - $4.99
Performance W1204P Tie Rod Separator (Pickle Fork) - $4.99
Performance 4" Slip Joint Pliers - $1.99
Wilmar W54006 Mechanic's Shop Cart with Tool Holder, Bins and Drawer - $79.99
Performance W693 3 Piece Cutting Set - $11.99
Performance 9/16" SAE Combination Wrench - $1.99
Performance 6" 2-Jaw Gear Puller - $3.99 Heat treated alloy steel construction Plated for corrosion resistance Beveled jaws

Performance W907 2-Piece Pocket Clip Screwdriver Set - $1.99
Performance Mechanics' W54004 2-Shelf Utility Cart w/Locking Drawer - $77.99
Performance W1007DB 7-Piece Auto Body Repair Kit - $16.99
Performance W1173 40 Piece Socket Set - $4.99
Performance W32534 1/2" Drive 1-1/16" 12-Point Socket - $2.99
Performance W415C 15inch Adjustable Wrench - $11.99
Performance W80510 Fly Wheel Turner - $9.99
Performance W242 3/4 Pint Pump Oiler - $3.99
Performance W80274 10-Piece T-Handle Hex Key Set SAE. - $6.99 Heat treated alloy steel shaftsPlastic grips add comfort & turning power10 Sizes 3/32 - 3/8 Bonus storage tray mounts on wall/bench

Performance W30717 5 PC Half Moon Wrench Set SAE - $19.99
Performance W50001 6" Bench Grinder with Light, 1/2 HP, 3400 RPM - $59.99
Performance W1519 265-Piece Tool Set - Lifetime Warranty - $26.99
Performance W38111 1/4 inch & 3/8 inch Dual Drive Ratchet with Flex-Head - $8.99
Performance W89720 Non-Contact Infrared Thermometer - $45.99
Performance W83246 2-3/4" rd Hex Lock Nut Socket - $10.99
Performance W2018 100-Piece Refill Rivet Kit - $2.99
Performance W41032 Engine Lifting Chain - $5.99
Performance 4-Piece Mini Stubby Screwdriver Set - $1.99 Great for confined or hard to reach places Chrome vanadium shafts Contains Phillips #1 & #2, Slotted 3/16 & 1/4

Performance W80149 Plastic Dial Calipers - $3.99
Performance W83243 2-1/2" Hex Lock Nut Socket - $9.99
Performance W36300 10-Piece 1/4" Drive Deep Socket Set (SAE) - $10.99
Performance W321C 5/16" SAE Combination Wrench - $1.99
Performance W1062 11-Piece Fully Polished Combo Wrench Set (MM) - $12.99
Performance W5204 1000pc Cotter Pin Assortment - $8.99
Performance W326C 5/8" Combination Wrench - $2.99
Performance W1070 4-Piece Combination Plier/Wrench Set - $8.99
Performance W30702 Precision Stubby Adjustable Wrench - $4.99 Performance/Performance Tools Stubby Adjustable Wrench.Precision scale up to 1 inch capacity.Chrome Vanadium steel construction.Contoured cushion grip handle.

Performance W85007 C Frame Creeper Seat - $21.99
Performance W1262C Swivel Inspection Mirror - $3.99
Wilmar W5600 17 Piece Kids Tool Set - $13.99
Performance Door Upholstery Tool - $3.99
Performance W1376 6pc Mini Star Bit Set - $2.99
Performance W80650 Steering Wheel Lock Plate Tool - $7.99
Performance W5222 347pc Metric Nut & Bolt Assortment - $4.99
Performance W38014 3/8" Drive 7/16" 6-Point Socket - $1.99
Performance W54205 Mini Grease Gun With Grease - $8.99 Mini Grease Gun With Grease

Performance 1/2� Dr. Beam Torque Wrench - $7.99
Performance W348B 2" Open Stock Jumbo Combination Wrench - $12.99
Performance W5201 270pc HNBR O-Ring Assortment - $5.99
Wilmar W1104M 13-Piece 20-32MM Wrench Set - $59.99
Performance W1046 Long Handle Grip Plier 90 Degrees - $6.99
Performance W1122C 6" Diagonal Cutter/Plier - $2.99
Performance W32300 8-Piece 1/2" Drive Deep Socket Set (SAE) - $14.99
Performance W38155 3 Piece 3/8 inch Driver Extensions: 1-3/4", 3", and 8" - $4.99
Performance Folding Star Bit Key Set - $3.99 Heat treated alloy steel constructionRust resistant black oxide finish8 Star keys, sizes T-9 thru T-40

Performance W322C 3/8" SAE Combination Wrench - $1.99
Performance W1160A 25-Piece 1/2� Dr. Socket Set - $12.99
Performance W1172 52-Piece Socket Set 1/4"-1/2" SAE & METRIC - $10.99
Performance W10056 Air Tank Manifold - $4.99
Performance W1175 9-Piece 3/8� Drive Deep Socket Set (SAE) - $9.99
Performance W1197 38-Piece Compact Auto Tool Set - $11.99
Performance W7 Folding 4-Way Lug Wrench (SAE) - $10.99
Performance W32901 26-Piece 1/2" Driver Socket Tool Set (SAE) - $49.99
Performance W135P 3" 3-Jaw Reversible Gear Puller - $5.99 Heat treated alloy steel Drop forged for strength Chrome plated finish

Performance W5025BP 2-Piece Tape Measure Set - $4.99
Performance W38304 21 Piece 1/4 inch DR Socket Set With Ratchet - $8.99
Performance W1066 12-Piece Combination Wrench Set w/Tray - $9.99
Performance W351 8-Piece 3/8" Crow Foot Wrench Set (SAE) - $12.99
Performance 1-7/16" Open Stock Jumbo Wrench - $7.99
Performance Precision Tubing Bender with Gauge - $11.99
Performance 1-3/8" Open Stock Jumbo Combination Wrench - $10.99
Performance W83240 2-3/8" Hex Lock Nut Socket - $10.99
Performance W1159 5-Piece Snap Ring Plier Set - $7.99 Plier handle and (4) tip assemblies(2) straight, (1) 45 and (1) 90(1) spring retainer assembly Vinyl grip handles For Internal or External snap rings

Performance W1632 12-Ton Hydraulic Bottle Jack - $37.99
Performance W32328 1/2" Drive 7/8" 6-Point Deep Socket - $3.99
Performance W5202 407pc SAE O-Ring Assortment - $10.99
Performance Tech Wear Gloves (Large) - $12.99
Performance W5390 6-Piece File Set - $7.99
Performance W1132 5-Piece Mini Plier Set - $10.99
Performance W83020 Bearing Race and Seal Driver - $19.99
Performance W38016 3/8" Drive 1/2" 6-Point Socket - $1.99
Performance W1136C 1/2� to 3/8� Drive Reducing Adapter - $1.99 Heat treated alloy steelHandy addition to any socket set

Performance W36101 1/4" dr CR-v QK Release Ratche - $10.99
Performance W32101 1/2" Drive Quick Release Teardrop Ratchet - $17.99
Performance W735 Hacksaw / Close Quarters Saw Set - $7.99
Performance W1012 Heavy Shrinking Hammer - $11.99
Performance W83008 1/2" Dr. 4-Lug Spindle Nut Wrench - $10.99
Performance W88999 Tech Wear Gloves (Medium) - $12.99
Performance 1-1/16" SAE Combination Wrench - $3.99
Performance 1-3/4" Open Stock Jumbo Combination Wrench - $10.99
Performance W284 4" Quik-Release C-Clamp - $4.99 Quik-release - just push the button and pull the screw!Tough enamel finishChrome plated screw threads, precision crafted for smooth operationMalleable iron construction4 jaw opening, 2-1/4 jaw depth

Performance 5-Piece Screw Extractor Set - $7.99
Performance W1045 11" Extended Reach 45 Degree Offset Needle Nose Pliers - $8.69
Performance W312C Performance 10mm (Metric) Combination Wrench - $1.99
Performance W323C 7/16" SAE Combination Wrench - $1.99
Performance W1389 100pc Master Bit Set - $6.99
Performance W974B Teflon Tape - $0.99
Performance W17C 3/8� Drive Rubber Grip Ratchet - $3.99
Performance W502 3/4" x 60' Electrical Tape - $0.99
Performance W38314 3/8" Drive 7/16" 6-Point Deep Socket - $2.99 Heat treated alloy steelDrop forged for strengthPolished chrome plated finish3/8 drive. 7/16 6-point deep socket.

Performance W1616 3 Ton Rapid Lift Floor Jack - $139.99
Performance W1628 8-Ton Hydraulic Bottle Jack - $27.99
Performance W2397 25ft Plastic Drop Light - $9.99
Performance W2020 4-Piece Pry Bar Set - $12.99
Performance W1525 125 pc Mechanic’s Tool Set - $59.99
Performance W38911 20-Piece 3/8" Driver Socket Tool Set (SAE) - $24.99
Performance W36904 22pc 1/4in Drive Socket Set - Metric - $23.99
Performance W41025 1,000 lb. Engine Stand - $59.99
Performance W1314 15-Piece Star Driver Bit Set - $7.99 Chrome vanadium steel construction Heat treated for strength Packaged in storage tray Includes (14) star driver bits (short shank T-10, T-15, T-20, T-25, T-30, T-40, T-45; long shank T-20, T-25, T-30, T-40, T-45, T-50, T-55) and 3/8 drive adaptor

Performance W332C 1" SAE Combination Wrench - $3.99
Performance W988 Mini Pocket Knife With Key Chain - $0.99
Performance W2017C 61-Piece Hand Riveter Set - $9.99
Performance Wheel Bearing Locknut Set - $54.99
Performance W80007 7-Piece Pro Screwdriver Set - $5.99
Performance W5226 1,200pc Nut & Bolt Assortment - $16.99
Performance W1069 22pc SAE/Metric Combination Wrench Set - $24.99
Performance 8" 3-Jaw Reversible Gear Puller - $19.99
Performance W30703 3pc Adjustable Wrench Set - $18.99 Set includes 12 inch, 8 inch and 6 inch Adjustable Wrenches6 point hex openings for additional flexibilityPrecision SAE & Metric rules on wrench headsSAE box ends in handles 7 1/16 inch, 1/2 inch and 5/8 inchErgonomic, soft, cushion gripsMachine polish finish & drop forged

Performance W5024 25' X 1" Tape Measure - $5.99
Performance W38002 10-Piece 3/8" Drive Socket Set (SAE) - $6.99
Performance W1114 14-Piece Combination Wrench Set (SAE) - $24.99
Performance W1265 Rectangular Magnetic Tray - $7.99
Performance W1116C 10" Lock Grip Plier - $3.99
Performance W54211 18" Flex Hose For Grease Gun - $4.99
Performance W54012 12-1/2 inch Tool Box - $4.99
Performance W4624 2 PC Star Driver Set - $9.99
Performance W38018 3/8" Drive 9/16" 6-Point Socket - $1.99 Heat treated alloy steel Drop forged for strength Polished chrome plated finish 3/8" drive. 9/16" 6-point socket

Performance W5196 4-Piece Stackable Trays - $9.38
Performance W32143 1/2" Drive 3" Extension - $2.99
Performance W4004DB 4 Ton Heavy Duty Power Puller - $35.99
Performance 6" 3-Jaw Reversible Gear Puller - $11.99
Performance W5025 25' x 1-1/4" Tape Measure - $4.99
Performance W12C 12" Adjustable Wrench - $6.99
Performance 9-Piece 1/4" & 3/8" Drive External Star Socket Set - $6.99
Performance 13/16" SAE Combination Wrench - $2.99
Performance W1117C 6" Long Nose Plier - $3.99 Drop forged steelCushion grips

Performance W1193 119-Piece Multi-Use Tool Set - $24.99
Performance W1175M 9-Piece 3/8� Dr. Deep Socket Set (Metric) - $9.99
Performance 12mm (Metric) Combination Wrench - $1.99
Performance W82003 Professional Tubing Cutter - $7.99
Performance w457 3" Stainless Steel All-Purpose Knife - $4.99
Performance W30714 4 pc Long Handle Plier Set - $17.99
Performance W30936 5 Piece Spark Plug Set - $8.99
Performance W36400 10-Piece 1/4" Drive Deep Socket Set (MM) - $10.99
Performance W30746 2pc Fixed Rivet Plier Set - $8.99 2pc Fixed Rivet Plier Set

Performance W83010 1/2" Dr. 4-Lug Spindle Nut Wrench - $9.99
Performance W38402 10-Piece 3/8" Drive Deep Socket Set (MM) - $12.99
Performance W30935 7-Piece U-Joint & Adapter Set (1/4", 3/8", & 1/2" Drive) - $9.99
Performance W41044 Transmission Adapter - $54.99
Performance W354B 2-1/4" Open Stock Jumbo Wrench - $21.99
Performance W730 Deluxe Tubular Hack Saw - $3.99
Performance W4000DB 2-Ton Power Puller - $19.99
Performance W733 Utility Hack Saw - $3.99
Performance W38101 3/8" Drive Quick Release Teardrop Ratchet - $13.99 Engineered for toughness and durabilityChrome vandium steel, fully polished3/8 drive quick release. 24 gear teeth, 7-5/8 long. Teardrop shaped head.

Performance W1121PC 8" Slip Joint Plier - $2.99
Performance W1071 2pc Combination Wrench Set - $5.99
Performance W1180 21-Piece 3/4� Dr. Socket Set With Case - $60.99
Performance 11/16" SAE Combination Wrench - $1.99
Performance W5220 200pc Hex Head Drill Screw Assortment - $5.99
Performance W1120PC 6" Slip Joint Plier - $2.99
Performance Bud Wheel Socket Set - $54.99
Performance W38316 3/8" Drive 1/2" 6-Point Deep Socket - $2.99
Performance 15/16" SAE Combination Wrench - $3.99 Heat treated Chrome Vanadium steelFull pattern, raised panel designPolished, chrome plated finish

Performance W38802 12 Piece Star Bit Set - $15.99
Performance W4002DB 40pc Tap and Die Set (Metric) - $17.99
Performance W1178 9-Piece 3/8" Drive Star Socket Set - $7.99
Performance W10005 5 Gallon Portable Air Tank - $44.99
Performance W1621 2-Ton Hydraulic Bottle Jack - $9.99
Performance W214C 6" C-Clamp - $6.99
Performance W30700 2-Piece Adjustable Wrench Set - $4.99
Performance W1162M 17-Piece 1/4� Drive Socket Set (Metric) - $4.99
Performance W3 20" 4-Way Metric Lug Wrench - $6.99 Performance W3 20 inch 4-Way Metric Lug Wrench

Performance W38215 3/8" Drive 15mm 6-Point Socket - $1.99
Performance W80670 Double Flare Tool Set - $15.99
Performance W4005DB One Ton Chain Hoist - $59.99
Performance W38210 3/8" Drive 10mm 6-Point Socket - $1.99
Performance W38022 3/8" Drive 11/16" 6-Point Socket - $1.99
Performance W54204 Pistol Grip Grease Gun 14 oz. - $11.99
Performance W38300 10-Piece 3/8" Drive Deep Socket Set (SAE) - $13.99
Performance W241 1/4 Pint Pump Oiler - $3.29
Wilmar W83038 38 MM 1" Drive Budd Wheel Socket - $6.99 The Wilmar W83038 is a 38 MM 1 Drive Budd Wheel Socket. The heavy-duty 1 drive 6-point socket has chrome moly construction. The Metric socket fits front & rear axle wheels on Isuzu, Hino, Mitsubishi Fuso & import trucks. The 38 mm socket is used on Mack Midliner, Volvo, White & import trucks with dual rear wheels.

Performance W2500P - 3/8� Dr. Impact Driver - $8.99
Performance W1347 125-Piece Drill & Driver-Bit Project Set W/Case - $19.99
Performance W734 4pc Close qtr Multi-Saw - $5.99
Performance W32400 8-Piece 1/2" Drive Deep Socket Set (MM) - $13.99
Performance 1/2� Drive Ratchet - $3.99
Performance W32145 1/2" Drive 5" Extension - $2.99
Performance W50005 5-Speed 1/3 HP Bench Top Drill Press - $79.99
Performance W80008 8-Piece Screwdriver Set - $7.99
Performance W38914 23-Piece 3/8" Driver Socket Tool Set (MM) - $34.99 -Includes-Socket sizes 10, 11, 13, 14, 15, 16, 17, 19 mm-Deep sockets 10, 11, 12, 13, 14, 15, 16, 17, 19 mm-16 and 21 mm spark plug sockets, universal joint, 3/8 teardrop head ratchet, and 3 & 6 extensions-Blow molded storage case

Performance 6-Piece Stardriver Set with Rack - $6.99
Wilmar W5124BP 2-Piece 25-feet and 12-feet SAE/MM Tape Measure - $5.99
Performance 8" 2-Jaw Gear Puller - $3.99
Performance 15-Piece Screwdriver Set - $10.99
Performance W83255 55mm Hex Lock Nut Socket - $10.99
Performance W54018 11 inch Portable 30 Compartment Organizer - $12.99
Wilmar W2380 2 in 1 Flexible Led Light and Laser Pointer - $3.99
Performance W1162A 17-Piece 1/4� Dr. Socket Set SAE. - $4.99
Performance W54020 20" Stainless Steel Tool Box - $34.00 Performance W54020 20" Stainless Steel Tool Box

Performax 60-6220 220 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $29.99
Performax 60-9120 120 Grit Premium Ready-To-Cut Sandpaper Roll - $99.99
Performax 60-6180 180 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $36.99
Performax 98-0130 Set of 4 Casters - $99.99
Performax 981601 Infeed/Outfeed Tbles, 10" D X 16" W - $79.00
Polishmaster 00046 Fleece Bonnet - $3.99
Performax 628900 10" x 20" Benchtop Drum Sander - $579.99
Performax 60-9150 150 Grit Premium Ready-To-Cut Sandpaper Roll - $99.99
Performax 60-6080 80 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $27.99 The Performax 60-6080 is a pack of 4, 80 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together.

Performax 60-9100 100 Grit Premium Ready-To-Cut Sandpaper Roll - $99.99
Performax 629004K 16-32 Plus Drum Sander with Stand - $999.99
Performax 638003DXK 22-44 Pro Deluxe Drum Sander - $2,039.99
Polishmaster 00085 Terry Cloth Bonnet - $3.99
Performax 60-9180 180 Grit Premium Ready-To-Cut Sandpaper - $99.99
Performax 60-6036 36 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $30.79
Performax 60-6060 60 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $27.99
Performax 60-9060 60 Grit Premium Ready-To-Cut Sandpaper Roll - $94.99
Performax 60-6100 100 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $34.99 The Performax 60-6100 is a pack of 4, 100 Grit Ready-to-Wrap Abrasive Strips. The Ready-to-Wrap Abrasive Sandpaper strips lock in place at the right angle for quick and easy grit changes. The Ready-to-Wrap sheets in the four-pack not only roll up perfectly on the sander for sanding but are also easy to change. The abrasive strips fit the 16-32 like a glove and hence last for a longer duration than other sheets. A sharp, durable aluminum oxide gives a fast and exceptionally long-lasting cut while the high-strength resin grain bonds the system together.

Performax 60-6120 120 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $34.99
Performax 60-6150 150 Grit Ready-to-Wrap Abrasive Strips (Pack of 4) - $34.99
Performax 60-9220 220 Grit Ready-To-Cut Abrasive Strip - $107.99
Porter-Cable 43541PC Traditional Chair Rail Router Bit - $54.99
Porter-Cable DA15200G 2 inch 15 Gauge Galvanized DA Finish Nails - $36.99
Porter-Cable 43052PC 3/4 inch Straight Router Bit - $16.99
Porter-Cable 690LR Factory Reconditioned 1-3/4 HP Fixed Base Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $109.99
Porter-Cable 13904 5 inch Hook and Loop Back Up Pad - $18.99
Porter-Cable FN16250 2-1/2 inch 16 Gauge Finish Nails - $14.99 2-1/2 inch 16-Gauge Finish Nails For FN model Stapler/Nailer 2500 per Box

Porter-Cable 48083 Protractor Gauge - $26.99
Porter-Cable 7424 6 inch Variable Speed Random Orbit Polisher - $149.99
Porter-Cable 1001 Router Base - $64.99
Porter-Cable 43578PC 3/8 inch Beading Router Bit - $29.99
Porter-Cable 43179PC Cove & Bead Router Bit - $29.99
Porter-Cable 43300PC 5/16 inch Straight Router Bit - $13.99
Porter-Cable 12840 7-1/4 inch 38 Carbide Teeth Circular Saw Blade - $49.99
Porter-Cable 7312 Offset Base Laminate Trim Router, 30000 RPM, 5.6 Amps - $169.99
Porter-Cable CFBN125B Factory Reconditioned Brad Nailer and Air Compressor Combo Kit, 18 Gauge - $149.99 The Porter-Cable CFBN125B is a factory reconditioned brad nailer and air compressor combo kit. The brad nailer features adjustable depth-of-drive, jam release mechanism, and tool-free quick-release nosepiece. A non-marring nose tip, hardened driver blade, side-load magazine and muffled adjustable exhaust port are some of the other salient features of Porter-Cable CFBN125B. The brad nailer uses 18 gauge, 5/8 inch to 1-1/4 inch brad nails.The 0.8 running HP pancake compressor has a 10 Amp, 120V AC motor. It also has 150-PSI pressure to provide quicker recovery and 6 gallon capacity for longer tool run time, and the oil-free pump helps in making the compressor maintenance free. The Porter-Cable CFBN125B compressor comes with 25 ft. of 1/4-inch air hose with a coupler and plug nailer oil, and works on standard household current.The multipurpose tool can be widely used for nailing applications like rimming, moldings, paneling and furniture assembling.

Porter-Cable 43425PC 1/4 inches Roundover Router Bit - $23.99
Porter-Cable 380B120 Bearing Kit Router Bit - $6.99
Porter-Cable FR31325 3-1/4 inches Framing Nails - $69.99
Porter-Cable 75301 Router Motor Height Adjuster - $29.99
Porter-Cable 43217PC 3 Wing Slot Cutter Router Bit - $19.99
Porter-Cable 43319PC 3/8 inch Keyhole (Solid Carbide) - $29.99
Porter-Cable FR350A Factory Reconditioned 3-1/2 inch Round-Head Framing Nailer Kit, 70-120 PSI - $159.99
Porter-Cable 43539PC 1/8 inch Triple Bead Router Bit - $46.99
Porter-Cable 43051PC 3/16 inch Straight-Cutting Double Flute Router Bit - $16.29 The Porter-Cable 43051PC is a 3/16 inch Straight-Cutting Double Flute Router Bit. The router bit is designed for general cutting including edge trimming and flat-bottomed grooves and dadoes. The double flute design of the bit provides superior balance and vibration-free cutting for a smoother finish and longer bit life. The Porter-Cable 43051PC bit is carbide-tipped for durability and long-lasting sharpness and fits all routers with 1/4 inch collets.

Porter-Cable 43586PC 5/8 inches Beading Router Bit - $40.99
Porter-Cable 330 Factory Reconditioned 1.2 Amps Speed-Bloc Quarter-Sheet Finishing Sander, 14000 OPM - $79.99
Porter-Cable 7499 Cut-Out Tool, 28000 RPM, 3.4 Amps - $59.99
Porter-Cable 987 19.2V Cordless Hammerdrill/Driver - Tool Only - $79.99
Porter-Cable RN20100 1 inches Coil Roofing Nails (7200 Pack) - $54.99
Porter-Cable 42948PC 1/4 inch V-Groove Router Bit - $17.99
Porter-Cable 7424 Factory Reconditioned 6 inches Variable Speed Random Orbit Polisher, 3.7 Amps, 6000 OPM - $119.99
Porter-Cable EXFAC2080 Ex-Cell 2 HP 8 Gallon Oil-Free Horizontal Air Compressor - $219.99
Porter-Cable NS150A 18 Gauge 1-1/2 inch Narrow Crown Stapler Kit - $104.99 The Porter-Cable NS150A is a 18 Gauge 1-1/2 inch Narrow Crown Stapler Kit. The stapler uses standard 18 gauge, 1/4 inches crown staples from 1/2- to 1-1/2 inches long. The contact safety is located behind the driver guide for stapling in tight spaces. It includes stapler, carrying case, pack of 1000 staples, 1/4 inches male quick coupler plug with dust cap, oil, Allen wrenches and operators manual.

Porter-Cable 43405PC 3/8 inch Roundover Router Bit - $25.99
Porter-Cable 43120PC 1/2 inches Rabbeting Router Bit - $26.99
Porter-Cable 7216 24 inch Omni jig Dovetail Machine, Maximum Stock Width of 24 inch, Maximum Stock Thickness of 1 inch - $419.99
Porter-Cable 43402PC 1/4 inch Roundover Router Bit - $24.99
Porter-Cable 43671PC 1/2 inch Bearing Guided Dado - $27.99
Porter-Cable FR31350 3-1/2 inch Framing Nails (Box of 4000) - $89.99
Porter-Cable 97355 5 inches Random Orbit Sander Kit with Dust Collection - $169.99
Porter-Cable ETS2 Ex-Cell Jitterbug Air Sander, 8000 RPM - $44.99
Porter-Cable 343VSK 5 inches Variable-Speed Random Orbit Sander Kit, 120V, 3 Amps - $79.99 The Porter-Cable 343VSK is a 5 inches Variable-Speed Random Orbit Sander Kit. Its top cap design allows users to service & clean out the unit without complete disassembly. It has improved ergonomics which allow for comfortable body & top gripping. It has 3.0 Amp motor for power and durability. Its 8 hole hook & loop pad accepts standard paper. The sander has a variable speed of 7000 - 12000 OPM which enables users to adjust proper pad speed for various applications.

Porter-Cable 43103PC 3/8 inch Cove Router Bit - $27.99
Porter-Cable 43540PC Reverse Curve Ogee & Bead Router Bit - $48.99
Porter-Cable 43772PC 3/8 inches Rabbeting Router Bit - $24.99
Porter-Cable C2150 2 HP 4 Gallon "Job Boss" Oil-Free Portable Pancake Style Air Compressor - $299.99
Porter-Cable 43180PC Wavy Edge Router Bit - $33.99
Porter-Cable 43290PC 1/2 inches Laminate Flush Trim Router Bit - $18.99
Porter-Cable 7310 Factory Reconditioned Laminate Trim Router, 5.6 Amps, 30000 RPM - $99.99
Porter-Cable 43085PC 3/16 inches Roundover Router Bit - $24.99
Porter-Cable 361 Factory Reconditioned 3 x 24 inch 1550 SFPM Belt Sander - $179.99 The Porter-Cable 361 Factory Reconditioned 3 inch x 24 inch 1550 SFPM Belt Sander. The sander features powerful 12.0 Amp motor which is located over platen for maximum performance and perfect balance. Belt and gear drive system transfers power from the motor to the sanding belt. It has fingertip belt-tracking knob for quick and accurate belt adjustments.

Porter-Cable 43082PC 3/8 inch Rabbeting Router Bit - $25.99
Porter-Cable 43443PC 3/4 inch Hinge Mortising Router Bit - $16.99
Porter-Cable 43126PC 5/32 inches Roman Ogee Router Bit - $34.99
Porter-Cable 43318PC 1/2 inch Straight Router Bit - $15.99
Porter-Cable FN16100 1 inch 16 Gauge Finish Nails - $9.99
Porter-Cable 43063PC 1 inches Straight Router Bit - $20.99
Porter-Cable 42186 Router Sub-Base - $12.99
Porter-Cable BN18075 18-Gauge 3/4 inches Brad Nails - $8.99
Porter-Cable 43174PC Classical Router Bit - $41.99 Beautiful bead and cove combination provide a quality accent to any project Pozi-Stop Shank Monster Carbide

Porter-Cable 43581PC 3/16 inch Beading Router Bit - $24.99
Porter-Cable 43147PC 3/4 inch Core Box - $20.99
Porter-Cable 7529 Factory Reconditioned 2 HP Variable Speed Plunge Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $159.99
Porter-Cable PTX5 Air Reciprocating Saw, 5000 SPM - $89.99
Porter-Cable FR13200 2 inch Decking Nails (5000-Pack) - $79.99
Porter-Cable 43931PC Solid Surface Roundover - $43.99
Porter-Cable 43751PC Classical Router Bit - $44.99
Porter-Cable BN18100 18-Gauge 1 inches Brad Nails - $8.99
Porter-Cable 121 Portable Oscillating Spindle Sander, 2400-3600 RPM, 6.0 Amps - $249.99 The Porter-Cable 121 spindle sander features variable speed control which allows rotation from 2400 to 3600 RPM and 38 to 60 oscillations per minute for sanding a variety of materials including hard and soft woods, solid surfaces, laminates, plastics and marble. The beefy 6 Amp motor has plenty of power for all sanding applications. The included edge guide allows accurate, pre-set removal of material for jointing and edge-smoothing operations.

Porter-Cable 43189PC 5/8 inch Straight-Cutting Double Flute Router Bit - $19.99
Porter-Cable 42000 9-Piece Template Guide Kit - $34.99
Porter-Cable 43207PC 1/4 inch Straight Router Bit - $15.99
Porter-Cable PT501 1/2 inches Air Impact Wrench, 7000 RPM, 1000 BPM - $89.99
Porter-Cable 43108PC 5/8 inches Roundover Router Bit - $36.99
Porter-Cable PSH1 Gravity Feed Spray Gun, 8.5 CFM - $89.99
Porter-Cable 43395PC 5/16 inch Diameter Arbor - $9.99
Porter-Cable 43527PC Traditional Horizontal Panel Raiser Router Bit - $84.99
Porter-Cable C2025 2.5 Gallon Oil-Free Hot Dog Compressor, 150 PSI - $199.99 Durable oil-free pump for long life and no maintenanceLow amp 120 Volt motor starts easily in cold weather or with extension cord2.5 Gallon Hotdog style tank is easy to carry, includes water drain valve and rubber feet150 PSI - Higher Pressure for longer air tool performance2.6 SCFM @ 90 PSI for fast recovery time

Porter-Cable CPF4515 Factory Reconditioned 15 Gallon Wheeled Air Compressor, 1.8 HP, 135 PSI - $239.99
Porter-Cable 7336SP 6 inch Variable Speed Random Orbit Sander with Polishing Pad - $139.99
Porter-Cable 708371503 4-1/2 inch x 14 inch 100 Grit Multi-Purpose Abrasive Sanding Belt (2-Pack) - $7.99
Porter Cable C2006 Factory Reconditioned 150 PSI Pancake Air Compressor - Tool Only - $129.99
Porter-Cable 42196PC 3-Wing Slot Cutter Arbor - $9.99
Porter-Cable 42700 Precision Router Edge Guide - $44.99
Porter-Cable 79180-5 180 Grit Hook and Loop Kit for 7800 Drywall Sander (5-Pack) - $24.99
Porter-Cable 43144PC 3/8 inch Core Box - $14.99
Porter-Cable CPLDC2540S Factory Reconditioned 2.5 HP Oil-Lube Air Compressor, 4.3 Gallon, 12 Amps - $299.99 2.5 Peak HP, 1.3 HP Running Patented oil lubrication system allows pump to be operated on an uneven surface Heavy-duty cast iron cylinder construction and large 8 oz oil capacity to assure long life 150 PSI tank pressure, equivalent to a 7.3 Gallon tank at 125 PSI, for 71% more stored work capacity Protected panel includes two universal High-FloSM push-to-connect couplers and larger, easy to read regulated air pressure gauge Higher 120 PSI cut-in pressure assures nails will be completely driven in before pump cycles on 83 dBA

Porter-Cable 43547PC Ogee Vertical Panel Raiser Router Bit - $59.99
Porter-Cable FLC200 2 inch Flooring Cleat Nails (1000-Pack) - $17.59
Porter-Cable BN18150 18-Gauge 1-1/2 inches Brad Nails - $16.99
Porter-Cable RN20150 1-1/2 inches Coil Roofing Nails (7200 Pack) - $69.99
Porter-Cable 3802L Factory Reconditioned 12 inches Compound Miter Saw with Laser, 15 Amps - $329.99
Porter-Cable 43699PC 1-1/8 inches Hinge Mortising Cutter - $26.99
Porter-Cable 43327PC 9/16 inch Straight Router Bit - $14.99
Porter-Cable 43705PC 1/2 inch 14° Dovetail Router Bit - $20.42
Porter-Cable 59375 Strike and Latch Template - $29.99 The Porter-Cable 59375 is a strike and latch template. It is easy to install doorknobs quickly with the Porter-Cable 59375 strike and latch template. With the template kit any 1/4 inch collet router can be used with the included bit to cut mortises.

Porter-Cable 43787PC 1/8 inches Edge Beading Router Bit - $26.99
Porter-Cable 42690 Precision Router Edge Guide - $44.99
Porter-Cable 55165 Miniature Box Joint Accessory Kit for the Omnijig Joinery Systems - $92.99
Porter-Cable 43404PC 5/32 inch Roundover Router Bit - $23.99
Porter-Cable PIN23075 23 Gauge 3/4 inches Pin Nails (2000 Pack) - $6.99
Porter-Cable 43561PC Ogee Rail 3/8 inches Tongue Router Bit - $89.99
Porter-Cable 43258PC 3 Wing Slot Cutter - $19.99
Porter-Cable 7336 6 inch Variable Speed Random Orbit Sander - $139.99
Porter-Cable 43721PC 1/2 inch Straight-Cutting Double Flute Router Bit - $17.99 The Porter-Cable 43721PC is a 1/2 inch Straight-Cutting Double Flute Router Bit. The router bit is designed for cutting fibrous reinforced plastics and epoxies. The double flute design of the bit provides superior balance and vibration-free cutting for a smoother finish and longer bit life. The Porter-Cable 43721PC bit is carbide-tipped for durability and long-lasting sharpness and fits all routers with 1/4 inch collets.

Porter-Cable PSH3 Gravity Feed Spray Gun - $59.99
Porter-Cable 43731PC 1/2 inch Laminate Flush Trim Router Bit - $16.99
Porter-Cable PTD501 1/2 inches Reversible Drill - $86.99
Porter-Cable 892 Factory Reconditioned 2-1/4 HP Variable Speed Fixed Base Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $159.99
Porter-Cable 43215PC Combination Panel Pilot Router Bit - $20.99
Porter-Cable 42901PC 3/16 inch Roundover Router Bit - $24.99
Porter-Cable DA15200 2 inch 15 Gauge DA Finish Nails - $28.99
Porter-Cable 43750PC 1/2 inch 14° Dovetail Router Bit - $19.99
Porter-Cable 42188 Router Sub-Base - $12.99 The Porter-Cable 42188 is a router sub-base. The Porter-Cable sub-base, with its extra large, 2-1/2 inch center hole, allows the use of larger diameter bits than a standard sub base. It is constructed of clear plastic, providing better visibility. The sub-base installs easily, using existing screws from router base.

Porter-Cable 891 Factory Reconditioned 2-1/4 Peak HP Grip Vac Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $159.99
Porter-Cable 79220-5 220 Grit Hook and Loop Kit for 7800 Drywall Sander (5-Pack) - $23.99
Porter Cable 712400605 2-1/2 Inch x 14 Inch Multi-Purpose 60-Grit Abrasive Sanding Belts - 5 pack - $8.99
Porter-Cable 43250PC 3 Wing Slot Cutter Router Bit - $16.99
Porter-Cable 43333PC 5/8 inch Straight Router Bit - $14.99
Porter-Cable 43370PC 1/4 inches R Edge Beading Router Bit - $29.99
Porter-Cable 77244 24-Inch Dust Hood for the 77240 Omnijig Joinery System - $39.99
Porter-Cable 77249 Accessory Storage Case for the Omnijig Joinery Systems - $55.99
Porter-Cable CFNBNS Factory Reconditioned Three Nailer/Compressor Combo Kit - $259.99 The Porter-Cable CFNBNS is a Factory Reconditioned Combo Kit, which includes a Finish Nailer, Brad Nailer, Stapler, and Compressor.The 150-PSI Porter-Cable compressor with two couplers works on standard household current. Besides driving a large quantity of nails in a single tank charge, the 6-gallon compressor proves useful for other pneumatic tools as well. The two quick connect couplers allow two nail guns to powered at the same time. Besides being quick on recovery, it is also oil-free and maintenance free. This portable compressor weighs just 34 pounds and has a handle on top for easily moving it around.The hardened driver blade ensures maximum durability and reliability for the Porter-Cable nailer. The special design of the tool-free jam release affords a clear line of sight and cuts down on interruptions. The nailers depth of drive can be easily adjusted and the nose tip does not mar the work surface. Die-cast aluminum used in the construct of the body makes the nailer lightweight for extended hours of use and yet strong enough to withstand the harsh jobsite treatment. The Porter-Cable stapler is sturdy and responsive, and does well for upholstery and other furniture coverings etc.

Porter-Cable DA250B 1 inch - 2-1/2 inches Finish Nailer Kit, 15 Gauge, 70-120 PSI - $149.99
Porter-Cable 55164 16-Inch Dust Hood for the 55160 Omnijig Joinery System - $29.99
Porter-Cable 43532PC 3 Wing Slot Cutter Router Bit - $16.99
Porter-Cable 97366 6inch Variable Speed Sander Kit with Dust Collection - $179.99
Porter-Cable FLC150 1-1/2 inch Flooring Cleat Nails (1000-Pack) - $16.99
Porter-Cable NS18075 3/4 inches length Staples (5000 Pack) - $12.99
Porter-Cable 43692PC Tru-Match Solid Surface Bit - $24.99
Porter-Cable 5560 Size 0 Tube Biscuits (150-Pack) - $6.99
Porter-Cable 43325PC 1/2 inch Pattern Cutting Template Bit - $19.99 The Porter-Cable 43325PC is a 1/2 inch Pattern Cutting Template Bit. The 1/2 inch bit is designed for through-template cuts where guiding with a ball bearing is desired. The 43325PC bit is a carbide tipped blade. The carbide tip is made from specially blended micro grain carbide for superior results and long lasting sharpness.

Porter-Cable 43512PC 7° Bevel Trimmer (Solid Carbide) Router Bit - $8.99
Porter-Cable 43584PC 3/8 inch Cove Router Bit - $34.99
Porter-Cable PTS2 5 inches High Speed Air Pad Sander, 18000 RPM - $44.99
Porter-Cable PT502 1/2 inches Air Impact Wrench, 8000 RPM, 1000 BPM - $114.99
Porter-Cable 43133PC 1/4 inch Roman Ogee Router Bit - $33.99
Porter-Cable 43428PC 1 inches Roundover Router Bit - $79.99
Porter-Cable FR13238 2-3/8 inch Decking Nails (5000-Pack) - $69.99
Porter-Cable 43499PC 1/4 inch Tongue & Groove Assembly - $54.99
Porter-Cable 43092PC 3/4 inch Roundover Router Bit - $44.99 The Porter-Cable 43092PC is a 3/4 inch Roundover Router Bit. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet. The 43092PC bit has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43092PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Porter-Cable 77245 Box Joint Accessory Kit for the Omnijig Joinery Systems - $61.99
Porter-Cable 708371505 6-1/2 inch x 14 inch 180 Grit Multi-Purpose Abrasive Sanding Belt (2-Pack) - $8.99
Porter-Cable AM782HC4V Air Mate Compressor - $266.99
Porter-Cable 43178PC Cove & Bead Router Bit - $33.99
Porter-Cable BN18200 18-Gauge 2 inches Brad Nails - $15.99
Porter-Cable 43421PC 1/8 inches Roundover Router Bit - $24.99
Porter-Cable 43454PC 1/2 inches 10° Dovetail Router Bit - $20.99
Porter Cable 343VSK Factory Reconditioned 5 inch Variable Speed Random Orbit Sander - Hook & Loop Pad - $64.99
Porter-Cable 43720PC 1/2 inches Straight Router Bit - $16.99 Straight double flute plastic cutting bit 1/2 inches width of cut 1-1/2 inches flute length 1/2 inches shank for vibration-free cutting

Porter-Cable 43292PC 3/4 inches Pattern Cutting Router Bit - $25.99
Porter-Cable RN175A Factory Reconditioned 7/8 inches to 1-3/4 inches Coil Roofing Nailer, 70 - 120 PSI, 120 Nails - $149.99
Porter-Cable 43437PC 1/2 inch Hinge Mortising Router Bit - $14.99
Porter-Cable 7335 5 inch Variable Speed Random Orbit Sander - $139.99
Porter-Cable 43538PC 1/8 inches R Triple Bead Router Bit - $43.99
Porter-Cable FN16125 1-1/4 inches 16 Gauge Finish Nails - $10.99
Porter-Cable C2150 Factory Reconditioned 2 HP 4 Gallon "Job Boss" Oil-Free Portable Pancake Style Air Compressor - $219.99
Porter-Cable 325MAG Factory Reconditioned 7-1/4 inches Circular Saw Kit, 5800 RPM, 15 Amps, 5800 RPM - $129.99
Porter-Cable 698 Router Table without Motor - $164.99 The Porter-Cable 698 is a Router Table without Motor. The table top is machined aluminum, lightweight but stable and measures out at a pretty generous 19-3/4 by 16-3/4 inches with a 3/4 inch miter gauge slot. There are two starter pin positions for folks who like to use them. As on most tables this size, the fence is a split design and while that has its detractors. Each section adjusts smoothly, giving flexibility in both front-to-back and lateral positioning. The table hole is large enough for a 3-1/2 inch bit and two inserts are included one with a large opening, the other small. The legs are a tad over a foot high, plenty of room for most routers and theyre wide and sturdy with predrilled holes on the bottom flanges.

Porter-Cable 43722PC 3/4 inches Straight Router Bit - $19.99
Porter-Cable 42160 Standard Router Edge Guide - $22.99
Porter-Cable 344 5 inch Random Orbit Sander - $79.99
Porter-Cable 43230PC 9/16 inch Straight Router Bit - $16.99
Porter-Cable 59370 Door Hinge Templet - $29.99
Porter-Cable BN18119 1-3/16 inches 18 Gauge Brad Nails (Box of 5000) - $12.99
Porter-Cable 13905 5 inch Contour Hook and Loop Replacement Pad for #333 Sander - $18.99
Porter-Cable PIN23050 23 Gauge 1/2 inch Pin Nails (2000-Pack) - $5.99
Porter-Cable 4212 12 inches Deluxe Dovetail Jig - $179.99 The Porter-Cable 4212 is a 12 inches Deluxe Dovetail Jig. It is a heavy-duty and easy-to-use dovetail jig. A 1/8 inches thick steel base along with CNC machined aluminum templates give the jig the strength and precision. Patented wood alignment lines along with a patented router bit depth stop make setup a breeze. The 4212 will cut through dovetails, box joints, half-blind dovetails, rabbeted half-blind dovetails and dovetail dadoes (sliding dovetails).

Porter-Cable 43312PC 3/8 inch Straight Router Bit - $13.99
Porter-Cable 43057PC 1/2 inch Straight Router Bit - $16.99
Porter-Cable 43444PC 1/2 inches 10° Dovetail Router Bit - $24.99
Porter-Cable 43229 Solid Carbide Burr Bit - 1/4 inches - $14.99
Porter-Cable 77247 Generic Double-Stop Set for the Omnijig Joinery Systems - $24.99
Porter-Cable 97310 1/4 inches Laminate Trim Kit, 30000 RPM, 5.6 Amps - $239.99
Porter-Cable 43418PC 1/16 inches Roundover Router Bit - $24.99
Porter-Cable 43091PC 1/2 inches Roundover Router Bit - $30.99
Porter-Cable 5551 Size 0 Plate Joining Biscuits (1000-Pack) - $29.99 The Porter-Cable 5551 Plate Joining Biscuits are made from compressed beech wood. These plate joining biscuits swell when they absorb water-based glues, further strengthening a wood joint. At 5/32 inch thick, they will fit slots cut by all standard plate joiners.

Porter-Cable 43171PC Classical Router Bit - $39.99
Porter-Cable 43597PC 1/4 inches Beading Router Bit - $29.99
Porter-Cable 43545PC Traditional Vertical Panel Raiser Router Bit - $52.99
Porter-Cable 43286PC 1/4 inches Laminate Flush Trim Router Bit - $19.99
Porter-Cable 693LRPK Factory Reconditioned 1-3/4 HP Router Kit PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $149.99
Porter-Cable 9690LR 1-3/4 HP Fixed Base Router Combo Kit PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $159.99
Porter-Cable 43329PC 3/4 inches Pattern Cutting Router Bit - $20.99
Porter-Cable FR20300 3 inch Decking Nail Case - $69.99
Porter-Cable NS18150 1-1/2 inches length Staples (5000 Pack) - $15.99 1-1/2 inches leg 18 Gauge x 1/4 inches crown Fits other pneumatic, air staplers Galvanized 5000 staples pack

Porter-Cable 8924 9.6V -19.2V Battery Charger - $79.99
Porter-Cable BN18175 18-Gauge 1-3/4 inches Brad Nails - $14.99
Porter-Cable 43514PC 45° Lock Miter Router Bit - $69.99
Porter-Cable 7518 Factory Reconditioned 3-1/4 HP Speedmatic Five-Speed Router PLUS FREE Porter-Cable 43425PC/2880132 1/2" Shank Roundover Bit - $279.99
Porter-Cable 7430 Factory Reconditioned 4-1/2 inch Slide Grinder - $39.99
Porter Cable 343K Factory Reconditioned 5-inch Random Orbit Sander Kit - $39.99
Porter-Cable ETD381 3/8 inches Ex-Cell Reversible Drill - $44.99
Porter-Cable 43783PC 1/4 inch Edge Beading Router Bit - $31.99
Porter-Cable BN18125 18-Gauge 1-1/4 inches Brad Nails - $10.99 Fits many standard 18 gauge brad nailers 18 gauge for fine finish work Galvanized for corrosion resistance

Porter-Cable FN16150 1-1/2 inch 16 Gauge Finish Nails - $12.99
Porter-Cable DA15250G 2-1/2 inch 15 Gauge Galvanized DA Finish Nails - $52.99
Porter-Cable 43550PC Classical Stile 3/8 inches Tongue Router Bit - $94.99
Porter-Cable 43509PC Flush Cut (Solid Carbide) Router Bit - $8.99
Porter-Cable NS18050 1/2 inch length Staples (5000 Pack) - $11.99
Porter-Cable 43911PC Solid Surface Ogee - $64.99
Porter-Cable 43413PC 3/8 inches Beading Router Bit - $25.99
Porter-Cable 7800 Factory Reconditioned 3.4 Amps Long Reach Drywall Sander, 8-7/8 inches, 2000 RPM - $369.99
Porter-Cable 345 Factory Reconditioned Saw Boss 6 inch Circular Saw, 6000 RPM, 9 Amps - $129.99 The Porter-Cable 345 is a Factory Reconditioned Saw Boss 9 Amps 6 inch Circular Saw. The dust nozzle allows the operator to direct dust to the side, away from his/her face. The 6 inch blade is able to cut 45 degree angles in all 2X framing lumber and a unique miter lip protrudes below the guard to prevent guard hang-ups at all angles. The 9 amp motor is all ball and needle bearing construction for long life. The base has adjustable positive stops at 45 degrees and 90 degrees for accurate angel cutting. For easy blade changes, a spindle lock is standard. The adjustable base insert allows splinter-free cutting on either side of the blade.

Porter-Cable 43408PC 1/2 inch Roundover Router Bit - $28.99
Porter-Cable PTX6 18 Gauge Air Shear, 2700 SPM - $69.99
Porter-Cable 894PK Factory Reconditioned 2-1/4 HP Multi-Base Router Kit PLUS FREE Porter-Cable 43425PC/2880132 1/2" Shank Roundover Bit - $199.99
Porter-Cable PTS1 6'' Dual Action Quiet Sander, 10000 RPM - $54.99
Porter-Cable 42908PC 3/4 inch Core Box - $23.99
Porter-Cable ETS1 Ex-Cell 6 inches D.A Air Sander - $49.99
Porter-Cable 43086PC 5/16 inches Roundover Router Bit - $26.99
Porter-Cable CPLC7060V 7.0 HP 60 Gallon Oil-Lube Stationary Air Compressor - $539.99
Porter-Cable 43820PC 1/8 inches Up Spiral Solid Carbide Router Bit - $15.99 1/8 inches straight cutting profile 1/2 inches flute length Up spiral design allows fast, clean cutting and excellent chip removal 1/4 inches shank Solid carbide construction for long lasting sharpness and durability

Porter-Cable BN18063 5/8 inch 18 Gauge Brad Nails (5000 per Box) - $9.99
Porter-Cable 43701PC 7/8 inch Hinge Mortising Cutter - $20.99
Porter-Cable 43410PC 1/4 inches Beading Router Bit - $23.99
Porter-Cable FC350A Factory Reconditioned 2 inches - 3-1/2 inches Clipped Head Framing Nailer Kit, 70 - 120 PSI - $149.99
Porter-Cable PCRBS03 3-Pc Laminate Trim Set - $36.99
Porter-Cable 43588PC 1/2 inches Cove Router Bit - $29.99
Porter-Cable 42234 Corner Chisel - $19.99
Porter-Cable ETK20 Ex-Cell 72 Piece Air Tool Kit, 7000 RPM - $109.99
Porter-Cable 557 Factory Reconditioned Deluxe Plate Joiner Kit, 7.5 Amps, 10000 RPM - $189.99 7.5 Amps, 120V AC only, 10000 RPM 1 inches O.D. dust port accepts standard bag or can be connected to a vacuum Fence tilts from 0 to 135 with positive adjustable stop at 90 Precise micro height-adjustment knob Lock-on trigger Includes both 2 inches and 4 inches diameter blades for standard and face-frame biscuits Height scale accurate at any angle Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex and Max (#6) biscuits

Porter-Cable 309 Laminate Trimmer, 28000 RPM - $139.99
Porter-Cable 43759PC 1/4 inches Ogee With Fillet - $34.99
Porter-Cable 43824PC 1/4 inch Up Spiral Straight Router Bit - $19.99
Porter-Cable 5507 9/64 Pilot Hole Bit - $14.99
Porter-Cable PT751 3/4 inches Air Impact Wrench, 5000 RPM, 1000 BPM - $199.99
Porter-Cable 42905PC 5/16 inches Roundover Router Bit - $29.99
Porter-Cable 43528PC Cove Horizontal Panel Raiser Router Bit - $89.99
Porter-Cable 42365PC 1/2 inches Down-Spiral Solid Carbide Router Bit - $57.99
Porter-Cable FN250B Factory Reconditioned 3/4 inch - 2-1/2 inch Finish Nailer - Tool Only - $104.99 The Porter-Cable FN250B is a Factory Reconditioned 3/4 inch - 2-1/2 inch Finish Nailer - Tool Only. It features the unique mounting system which eliminates out-of-aligned magazines due to dropping or misuse. The tapered magazine provides more clearance for installing crown moldings or nailing in tight spaces. With the ability to shoot all 16 Gauge finish nails ranging from 3/4 inch to 2-1/2 inch without the use of a nail guide the gun can be used for various applications. A built-in depth-of-drive adjustment with 8 detents allows consistent countersinking of each nail regardless of wood type.

Porter-Cable 43551PC Classical Rail 3/8 inches Tongue Router Bit - $97.99
Porter-Cable 43177PC 1/4 inches Ogee Router Bit With Fillet - $42.99
Porter-Cable PIN100 23 Gauge Pin Nailer Kit, 60-100 PSI, 170 170 Pin Micro Nails - $109.99
Porter-Cable C5510 Factory Reconditioned 20 Gallon Air Compressor, 1.9 HP, 5.4 SCFM - $469.99
Porter-Cable C2002 Factory Reconditioned 6 Gallon Oil-Free Pancake Compressor - $159.99
Porter-Cable PCRBS06 6-Pc Decorative Edging Set - $89.99
Porter-Cable 43504PC Reversible Glue Joint Router Bit - $57.99
Porter-Cable 43534PC 17/64 inch Bull Nose Router Bit - $32.99
Porter-Cable 43392PC Stackable Slot Cutter Assembly - $77.99 The Porter-Cable 43392PC is used to make rabbets, dadoes, lap joints, tongue and groove joints and T-molding installations. The assembly comes with four 3-wing slot cutters, a 1/2 inches arbor bearing for 1/2 inches depth of cut, shims and spacers. When a single cutter is used many shims can be used to insure the cutter is tightly fastened for a safe cut.

Porter-Cable 6931 Plunge Router Base - $104.99
Porter-Cable RN20125 1-1/4 inches Roofing Nails (7200 Pack) - $59.99
Porter-Cable C3551 Factory Reconditioned 2.5 HP 4.5 Gallon "Job Boss" Portable Air Compressor - $269.99
Porter-Cable NS18088 7/8 inches length Staples (5000 Pack) - $13.99
Porter-Cable 43719PC 3/8 inch Straight Router Bit - $16.99
Porter-Cable BN125A Factory Reconditioned 18 Gauge 5/8 inch to 1-1/4 inch Brad Nailer Kit - Tool Only - $49.99
Porter-Cable 708371502 3-1/2 inch x 14 inch 80 Grit Multi-Purpose Abrasive Sanding Belt (2-Pack) - $12.99
Porter-Cable PTD381 3/8 inches Reversible Angle Drill - $89.99
Porter-Cable 43718PC 1/4 inch Straight Router Bit - $13.99 The Porter-Cable 43718PC is a 1/4 inch 2 Flute Straight Router Bit. It is designed for general stock removal where superior balance and vibration-free cutting provides a smoother finish and longer bit life.

Porter-Cable 43767PC 1/4 inch Double Roman Ogee Router Bit - $36.99
Porter-Cable PCRBS04 4-Pc Groove and Trim Set - $46.99
Porter-Cable 5558 4 inch, 6 Tooth Plate Joiner Blade for 556 & 557 Joiners - $59.99
Porter-Cable 43431PC 7/8 inch Roundover Router Bit - $69.99
Porter-Cable 5562 Size 20 Tube Biscuits (100-Pack) - $6.99
Porter-Cable 43064PC Combination Panel Pilot Router Bit - $14.99
Porter-Cable 43600PC 5/32 inches Roman Ogee Router Bit - $34.99
Porter-Cable US38G 3/8 inches Upholstery Staples (10000 Pack) - $9.99
Porter-Cable 9543 Factory Reconditioned Quik-Change Jig Saw Kit - $149.99 The Porter-Cable 9543 is a Factory Reconditioned Quik-Change Jig Saw Kit. The saw features a reliable and strong-holding quick-blade change system that eliminates the need for a hex wrench. The mechanism accepts only T-shank blades, but offers a reliable blade grip. The base bevel adjustment is also tool-free and involves popping out a built-in crank from behind the saw, giving a few twists to loosen and then giving a few more twists in the opposite direction once the bevel is set. The jig saw has a hefty 6 Amp motor with more than enough power for professional applications. It features a variable-speed trigger as well as a variable-speed dial. The 9543 jig saw kit also offers a dust blower to keep the line clean, along with orbital cutting action that features varying degrees of orbit, from full for soft wood to none for metal cutting.

Porter-Cable 43816PC 1/4 inches Straight Solid Carbide Router Bit - $16.99
Porter-Cable 42999 1/4 inch Self Releasing Collet - $11.99
Porter-Cable 845 19.2V 6 inches Cordless Boss Circular Saw - Tool Only - $64.99
Porter-Cable US12G 1/2 inches Upholstery Staples (10000 Pack) - $9.99
Porter-Cable 345 6 inch Saw Boss Circular Saw - $159.99
Porter-Cable 43364PC 1/8 inches R Edge Beading Router Bit - $29.99
Porter-Cable FN250B Factory Reconditioned 3/4 inches - 2-1/2 inches Finish Nailer, 16 Gauge, 70-120 PSI - $99.99
Porter-Cable 13906 6 inch Adapta Standard Replacement Pad for #335 sander - $24.99
Porter-Cable 423MAG Factory Reconditioned 7-1/4 inches Quik-Change Blade-Left MAG-SAW Kit, 15 Amps, 5800 RPM - $99.99 Quick-Change keyless blade change offers tool-less blade changes in seconds Aggressive cuts with a 15 Amp motor at 5800 RPM Magnesium construction provides more durability and lighter weight at 9.6 lbs Soft Grip handle for a comfortable fit Integrated dust exhaust port with 205 rotation and a 1 inches O.D. for vacuum attachment Magnesium base features quick reference 45 edge for marking material Versatility with its 0-50 miter capacity and a positive stop at 45

Porter-Cable NS100A Factory Reconditioned 1 inch Narrow Crown Stapler - Tool Only - $49.99
Porter-Cable PIN23100 23 Gauge 1 inches Pin Nails (2000 Pack) - $6.99
Porter-Cable XC2800 Ex-Cellâ„¢ Gas Pressure Washer with 6.0 Horsepower Honda Motor, 2800 PSI - $419.88
Porter-Cable PTS5 5 inches Random Orbit Sander - $114.99
Porter-Cable 43145PC 1/2 inches Core Box Router Bit - $17.99
Porter-Cable 330 Speed-Bloc Quarter-Sheet Finishing Sander, 1.2 Amps - $89.99
Porter-Cable 310 Factory Reconditioned Laminate Trimmer - $139.99
Porter-Cable DA15250 2-1/2 inch 15 Gauge DA Finish Nails - $37.99
Porter-Cable 43118PC 1/2 inch Straight-Cutting Double Flute Router Bit - $29.99 The Porter-Cable 43118PC is a 1/2 inch Straight-Cutting Double Flute Router Bit. The router bit is designed for general cutting including edge trimming and flat-bottomed grooves and dadoes. The double flute design of the bit provides superior balance and vibration-free cutting for a smoother finish and longer bit life. The Porter-Cable 43118PC bit is carbide-tipped for durability and long-lasting sharpness and fits all routers with 1/4 inch collets.

Porter-Cable 43745PC 1-1/4 inches Hinge Mortising Cutter - $19.99
Porter-Cable 5554 Plate Joining Biscuits - Assorted Sizes (1000-Pack) - $29.99
Porter-Cable 43560PC Ogee Stile 3/8 inches Tongue Router Bit - $89.99
Porter-Cable 352VS Factory Reconditioned 3 inch x 21 inch Variable Speed Belt Sander, 850-1300 SFPM, 8.0 Amps - $149.99
Porter-Cable 43308PC Dado & Planer Router Bit - $25.99
Porter-Cable 9690LR Factory Reconditioned 1-3/4 HP Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $124.99
Porter-Cable PTH1 Air Hammer, 3000 BPM - $44.99
Porter-Cable C6110 Factory Reconditioned Oil-Free Induction Vertical Portable Air Compressor - $349.99
Porter-Cable 342K 1/4 Sheet Palm Sander Kit - $54.99 The Porter Cable 342K 1/4 sheet palm sander delivers the power and durability to meet the demands of the professional shop environment with its 2.4 Amp motor. The sander is designed with an accessible top cap which you can remove to quickly clean out and service the sander. This newly designed unit feels more comfortable in your hand and the new rubber top grip makes the unit easier to hold. With the increased importance of controlling dust in your shop this sander comes with the POREX dust canister which exceeds the durability efficiency of cloth dust bags. The sander also has dual dust ports that can accept 1 and 1-1/2 vacuum hoses.

Porter-Cable 690LR 1-3/4 HP Fixed Base Router PLUS FREE Porter-Cable 43085PC/2880018 1/4" Shank Roundover Bit - $129.99
Porter-Cable 43121PC 1/2 inches Rabbeting Router Bit - $26.99
Porter-Cable 371K Factory Reconditioned 2-1/2 inch x 14 inch Compact Belt Sander, 5 Amps, 120V - $89.99
Porter-Cable 5553 Size 20 Plate Joining Biscuits (1000-Pack) - $29.99
Porter-Cable 43289PC 3/8 inch Laminate Flush Trim Router Bit - $15.99
Porter-Cable 708371504 5-1/2 inch x 14 inch 120 Grit Multi-Purpose Abrasive Sanding Belt (2-Pack) - $7.99
Porter-Cable 505 Half Sheet Finishing Sander - $179.99
Porter-Cable 12855 6 inch, 40-Tooth Thin Kerf Riptide Saw Blade - $20.99
Porter-Cable FR350A 3-1/2 inches x 0.113 inches to 0.148 inches Round-Head Framing Nailer Kit, 22º Angle - $189.99 Uses 22 2 inches to 3-1/2 inches x 0.113 inches to 0.148 inches plastic collated round-head framing nails Nail lockout mechanism alerts operator to reload tool Tool-free adjustable exhaust Removable non-marring nose tip with on tool storage Delivers twice the life over previous tools Power to drive nails (up to 3-1/2 inches x 0.131 inch) into engineered lumber Compact body design for better balance and style

Porter-Cable 43190PC 45° Chamfer Router Bit - $29.99
Porter-Cable 54741 7 inch Hook & Loop Polishing Bonnet for 7401 & 7428 Polishers - $12.99
Porter-Cable 43724PC 1/2 inches Stagger tooth Router Bit - $19.99
Porter-Cable EXFBC6025 Ex-Cell 2 HP 20 Gallon Horizontal Portable Air Compressor - $289.99
Porter-Cable PT382 3/8 inches Air Impact Wrench, 11000 RPM, 1800 BPM - $79.99
Porter-Cable PTR381 3/8 inches Air Ratchet Wrench, 160 RPM - $59.99
Porter-Cable 43127PC 1/4 inches Roman Ogee Router Bit - $34.99
Porter-Cable 43570PC Straight Horizontal Panel Raiser Router Bit - $71.99
Porter-Cable ETR381 Ex-Cell 3/8 inches Air Ratchet Wrench - $39.99 Lever throttle for precise control Compact head design allows flexibility in tight areas Ball-type socket retainer General assembly, maintenance and fastening

Porter-Cable FR31225 2-1/2 inch Decking Nail Case - $79.99
Porter-Cable 43326PC 5/8 inches Pattern Cutting Router Bit - $20.99
Porter-Cable 43109PC 1/8 inch Straight (Solid Carbide) Router Bit - $14.99
Porter-Cable 5563 Face Frame Biscuits (175-Pack) - $8.99
Porter-Cable 54742 7 inch Hook & Loop Lambs Wool Buffing Bonnet for 7401 & 7428 Polishers - $13.99
Porter-Cable 505 Factory Reconditioned 2.3 Amps 1/2 inch Sheet Finishing Sander - Tool Only - $149.99
Porter-Cable NS18100 18 Gauge 1 inch Narrow Crown Staple - 5000 Box - $14.99
Porter-Cable PTS6 5 inch Air Random Orbit Sander - $129.99
Porter-Cable 43593PC 3/16 inches Beading Router Bit - $24.99 Carbide tipped ball bearing pilot beading router bit For decorative period edging

Porter-Cable 325MAG 7-1/4 inch Quik Change Circular Saw Kit - $169.99
Porter-Cable 43422PC 1/8 inch Roundover Router Bit - $23.99
Porter-Cable 43117 3/8 inch Flute Spiral Down Bit For #552 - $39.99
Porter-Cable 79080-5 80 Grit Hook and Loop Kit for 7800 Drywall Sander (5-Pack) - $24.99
Porter-Cable 43833PC 3/8 inches Up Spiral (Solid Carbide) Bit - $44.99
Porter-Cable 59381 Hinge Butt Template Kit - $209.99
Porter-Cable 893PK Factory Reconditioned 2-1/4 HP Multi Base Router Kit PLUS FREE Porter-Cable 43425PC/2880132 1/2" Shank Roundover Bit - $199.99
Porter-Cable 43559PC Classical Router Bit - $35.99
Porter-Cable 12850-10 6 inch Riptide Saw Blade, 18-Tooth, Thin Kerf - $11.99 The Porter-Cable 12850-10 is a 6 inch Riptide Saw Blade. The thin-kerf design reduces drag on the motor, allowing the saw to cut more effectively. The teeth are made of fine-grained tungsten-carbide to stay sharp longer.

Porter-Cable 43763PC 1/4 inch Double Roman Ogee Router Bit - $46.76
Porter-Cable NS18125 1-1/4 inches length Staples (5000 Pack) - $15.99
Porter-Cable PIN23063 23 Gauge 5/8 inch Pin Nails (2000-Pack) - $6.99
Porter-Cable 43529PC Ogee Horizontal Panel Raiser - $89.99
Porter-Cable 43072PC 45° Chamfer Router Bit - $23.99
Porter-Cable Bag Empty Two-Tool Bag - $14.99
Porter-Cable 43921PC Solid Surface Bowl & Sink Trim - $34.99
Porter-Cable 43725PC 1/2 inches 90¡ V-Groove Router Bit - $19.99
Porter-Cable 43427PC 3/8 inches Roundover Router Bit - $24.99 The Porter-Cable 43427PC is a 3/8 inches Roundover Router Bit. Porter-Cable Professional Edge router bit is constructed of 4140 Alloy Steel. It is a harder grade of steel than standard cast steel bit bodies. The bit is annealed and heat treated to Rockwell hardness of 40-45-harder than is possible with cast steel bodies. A black oxide coating protects against corrosion while preventing resin build up and improving chip clearance.

Porter-Cable 42900PC 1 inches Core Box Router Bit - $24.99
Porter-Cable 77254 Generic Single-Stop Set for the Omnijig Joinery Systems - $7.99
Porter-Cable NS18063 5/8 inch length Staples (5000 Pack) - $11.99
Porter-Cable 43730PC Two-Flute Laminate Flush Trimming Router Bit - $16.99
Porter-Cable 5552 Size 10 Plate Joining Biscuits (1000-Pack) - $29.99
Porter-Cable US58 22 Gauge 5/8 inches Upholstery Stapler, 70 - 120 PSI, 185 Staples - $89.99
Porter-Cable 324MAGV 7-1/4 inch Mag Saw Blade Right with 2 Blades - $159.99
Porter-Cable US58G 5/8 inches Upholstery Staples (10000 Pack - $7.99
Porter-Cable 43580PC 1/4 inches Cove Router Bit - $29.99 1/4 inches Cove Router Bit Ball-bearing pilot 1/2 inches flute length 1/2 inches shank Carbide-tipped for long-lasting sharpness and durability

Porter-Cable 694VK Factory Reconditioned 1-3/4 HP Variable Speed Router Kit PLUS FREE Porter-Cable 43425PC/2880132 1/2" Shank Roundover Bit - $179.99
Porter-Cable 43704PC 1 inch Hinge Mortising Cutter - $24.99
Porter-Cable 8823 19.2-Volt NiCd Battery Pack - $79.99
Porter-Cable 370 1/4 Sheet Palm Sander - $37.99
Porter-Cable 3812 Portable Table Saw - $419.99
Porter-Cable FR13238G 2-3/8 inch Galvanized Decking Nails (5000-Pack) - $74.99
Porter-Cable 12870 4-1/2 inch, 20-Tooth Thin Kerf Riptide Saw Blade - $19.99
Powermatic 1791264 DS-20-3 20" Disc Sander, 3 HP, 3 Phase, 230-460V - $2,069.99
Byrd 1791212 Insert Cutters (10 Pack) - $49.99 Byrd 1791212 Insert Cutters (10 Pack)

Powermatic 2042372 Mobile Base For Models with 30" Accu-Fence And Rout-R-Lift for Model 66 - $224.99
Powermatic 1791786 Zero Clearance Insert for PM2000 - $49.99
Powermatic 1791310 701 PM Benchtop Deluxe Mortiser - $469.99
Powermatic 1791270K 64A 10" Table Saw with 30" Accu-Fence and Rout-R-Lift System, 1-1/2 HP, 1 Phase, 115-230V - $1,434.99
Powermatic 6285528 3/8" Mortiser Chisel & Bit - $26.99
Powermatic 1790821 PF-BS Power Feeder Stock Feeder, 1/2 HP, 3 Phase, 460V - $1,919.99
Powermatic 1792800 PM2800 18" Variable Speed Drill Press W/Digital Readout - $1,079.99
Powermatic 1791202 Model: S-12DC 12" Disc Sander less Closed Stand - $554.99
Powermatic 1352001 3520B - 20" X 35" Professional Woodworking Lathe - $2,999.99 The powermatic 1352001/3520B is a 20 X 35 professional woodworking lathe. The electronic variable speed wood lathe has a swing of 20 and a distance between centers of 34 1/2. It is powered by 2 HP 220V motor and can be run on either 2Ph or 1Ph. This unit has an all cast iron headstock, bed and legs that will provide the weight needed in a lathe of this size. The digital readout allows the turner to see the RPM of the spindle to be more accurate in the turning operation. The included tool caddy mounts to the lathe and allows the user to store all the necessary tools under the headstock.

Powermatic 1791201 Model: CS-12DS Closed Stand for 12" Pow Disc Sander - $449.99
Powermatic 1660807K Model 66 10" Left Tilt Cabinet Saw with 50" Acc-Fence, 5 HP, 3 Phase, 460V - $2,799.99
Powermatic 1660814K Model 66 10" Left Tilt Cabinet Saw with 50" Acc-Fence, Rout-R-Lift System, Table Board & Legs, 5 HP, 1 Phase, 230V - $3,164.99
Powermatic 1791787 Low Profile Riving Knife for Powermatic 2000 Table Saw - $39.99
Powermatic 1790818 PF3-JR Power Feeder Stock Feeder, 1/4 HP, 1 Phase, 115V - $619.99
Powermatic 6285529 1/2" Mortiser Chisel & Bit - $26.99
Powermatic 1790800K PF-33 Power Feeder Stock Feeder, 1 HP, 3 Phase, 230V - $1,024.99
Powermatic 2042335 Mobile Base for Model 66 Saw - $224.99
Powermatic 1610080 Model PJ882 8-Inch 3 Horsepower Three Phase Parallelogram Jointer - $1,899.99 This machine offers performance and value in a machine loaded with features like an extra long 82 bed length for better work support, innovative fence design that allows you to turn a handwheel that tilts the fence in and out with positive stops at +/- 45 and 90 degrees. A non-mar insert in the fence contacts the table to avoid scratching the surface during adjustments. The parallelogram design keeps the table in close proximity to the cutterhead for improved finish and allows for a fast depth of cut adjustment. This design also insures the table remains perfectly parallel, even after years of tough duty. The 1/8 depth limiter control knob gives you quick adjustment and safety. A quick twist of the knob will disable this feature. This jointer features Powermatic controlled chip 3-kinfe cutterhead for a safe, smooth cut every time. The powerful 3HP motor, three Phase is totally encased in a heavy constructed steel stand providing plenty of power for even the most demanding jobs.

Powermatic 1790820 PF-BS Power Feeder Stock Feeder, 1/2 HP, 3 Phase, 230V - $1,919.99
Powermatic 2042376 Mobile Base 60B 8" Jointer - $159.99
Powermatic 1791292K 31A 6"/12" Belt/Disc Sander, 2 HP, 3 Phase, 230/460V - $1,325.99
Powermatic 1790817K PF4-ARC Power Feeder Stock Feeder, 1/2 HP, 3 Phase, 460V - $1,029.99
Powermatic 6296046 8" Jointer Knives - Set of 3 - $62.99
Powermatic 1791077CK PM1300 Dust Collector with Canister Kit, 1-3/4 HP - $729.99
Powermatic 1790814K PF3-EZ Variable Speed Power Feeder Stock Feeder, 3/4 HP, 3 Phase, 230V - $1,779.99
Powermatic 1790807K PF-33 Power Feeder Stock Feeder, 1 HP, 1 Phase, 115V - $1,149.99
Powermatic 6285526 1/4" Mortiser Chisel & Bit - $24.99 Powermatic 6285526 1/4 Mortiser Chisel & Bit for use with Powermatic #719 mortiser it is ideal for making furniture with steadfast joints, it installs quickly and easily also cuts precision mortises at depths that are easily controlled.

Powermatic 1660760K 10" Table Saw w/50" Fence - $2,799.99
Powermatic 1610078 Mobile Base for 1610079 and 1610080 - $212.99
Powermatic 1790810K PF-33 Power Feeder Stock Feeder, 1 HP, 3 Phase, 460V - $1,024.99
Powermatic 1790811K PF-43 Power Feeder Stock Feeder, 1 HP, 3 Phase, 230V - $1,149.99
Powermatic 2042336 Powermatic Mobile Base for 27S Shaper - $139.99
Powermatic 1790815K PF3-EZ Variable Speed Power Feeder Stock Feeder, 3/4 HP, 3 Phase, 460V - $1,779.99
Powermatic 6284800 15" Double Sided Replacement Planer Knives (Set of 3) - $124.99
Powermatic 1791788 Dado Insert for PM2000 - $49.99
Powermatic 1660750K Model 66 10" Left Tilt Cabinet Saw with 50" Acc-Fence, 5 HP, 3 Phase, 208/230V - $2,799.99 The Powermatic 1660750K is a 10 Left Tilt Cabinet Saw. The left tilting blade prevents stock from binding between the blade and fence, substantially reducing the possibility of kickback. Left tilting blade also aids in making clean mitre cuts leaving any tear-out on the bottom side of the workpiece. It features wide stanced, heavy-duty, one-piece trunnion which has a C-flange mount, relieving weight at the saw arm pivot shaft and promoting easier raising and tilting of saw blade. The Exclusive 3VX-belt drive distributes torque more efficiently and generates less heat while operating virtually vibration-free.

Powermatic 1791071 Model 75 3 HP 4 Vertical Bag Dust Collector, 1900 CFM, 1 Phase, 230V - $961.99
Powermatic 1791076CK PM1900 Dust Collector with Canister Kit, 3 HP - $1,249.99
PowerMatic 1270151 27S, 5HP, 1Ph, 230V, 1-1/4" Solid Spindle Shaper - $3,029.99
Powermatic 6285527 5/16" Mortiser Chisel & Bit - $21.99
Powermatic 1791309 720HD Heavy-Duty Mortiser, 1725 RPM, 1-1/2 HP - $2,109.99
Powermatic 1790812K PF-43 Power Feeder Stock Feeder, 1 HP, 1 Phase, 115V - $1,199.99
Powermatic 1791279DXK 6" Deluxe Closed Stand Jointer, 5000 RPM, 1 HP - $1,039.99
Powermatic 1610082 PJ-882HH 8 inch Parallelogram Jointer with Helical Cutterhead, 2 HP - $2,299.99
Powermatic 1791207 PM2700-.25RC 1/4-Inch Collet for the PM2700 Shaper - $75.99 The Powermatic 1791207 is an accessory for the Powermatic PM2700 Shaper. It can be used to install 1/4 router bits for use with the PM2700 Shaper.

Powermatic 1791075CK PM1900 3 HP Dust Coll